anyone running a short passenger side exhaust?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Redid my exhaust as a side exit. Used the stock exhaust hanger with a another hanger I made bolted on.
Then made one more hanger further down that bolts to a body mount support (used exhaust hanger rod, super easy to work with) :)
Exhaust hanger bolted onto stock bracket Dec 22, 2011.webp
Finished hanger that bolts to exhaust pipe Dec 22, 2011.webp
Lining up exhaust for hangers Dec 22, 2011.webp
 
John

Just for the info, I did this on my wagon and found I couldn't run with the back window open. Got a lot of exhaust into the cabin....

But I did find a way to get the exhaust over the frame to solve the clearance issue.

Tony
 
You mean the rear passenger window? Thanks for the feedback:)
I never really open it too much anyways, and with the A/C going in I should not need it open at all :)
But if it is a problem I can just extend it through the rear wheelwell to the back. Do you have any pictures?
 
Yep, it comes in the passenger window or at least mine did, I also didn't like the noise level. It was way higher than out the back, but I don't have a turbo so that will make a difference for you.

But here is a pic where I went over the frame. If you look you can see the heater lines where there is a gap over the frame.

Tony
exhaust over drive shaft.webp
exhaust over frame.webp
 
You must log in or register to reply here.

Share this page

Back
Top Bottom