Anybody have 4x4 labs they don't want ?

[half k cruiser]

Looking to make dual swing outs for my shell. I know a lot of guys on here have ordered and thought it was worth a shot. If you have some 4x4 labs stuff you want to get rid of or spare spindles or what not. Let me know.

 

[1MAC]

I have a ladder kit (no swingout arm) that I probably won't use.

 

[half k cruiser]

I have a ladder kit (no swingout arm) that I probably won't use.

Do you know if its sleeved for a third accessory and does it come with hi lift mount ? I would like to have a ladder for future use but was thinking of making a cooler basket that would hang off of one of the rungs.

 

[2fpower]

I have a spindle. Just bought for my 40 that ended up too wide. Think it was $85.

 

[half k cruiser]

I have a spindle. Just bought for my 40 that ended up too wide. Think it was $85.

This is the 4x4 spindle plus sleeve, I would just need to provide the square tube ?

 

[1MAC]

Do you know if its sleeved for a third accessory and does it come with hi lift mount ? I would like to have a ladder for future use but was thinking of making a cooler basket that would hang off of one of the rungs.

Here's what it is:

Ladder #2- kit $175
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket (not sure what this is or if mine came with it?)
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

pm or email me if you think you want it. I have blasted and primed the square tubing to get the mill scale off and primed it. Otherwise, the kit is as received from Luke. I built the tire carrier and gas can carrier and just don't think I need a ladder.

 

[2fpower]

This is the 4x4 spindle plus sleeve, I would just need to provide the square tube ?

Yes. @1MAC tacked it onto his order in December. I upgraded to 2x3 1/4 wall tube. I should have the inserts if you are going back to bolt it on like 4x4 does.

 

[1MAC]

Here's all the parts I have left from my bumper build:

 

[Jorgito]

How difficult is to weld the gas can ? I already wrote to 4x4 labs and they verified that it is possible to mount it on the Kaymar arm. I am thinking of buying the kit BUT: I never welded and neither do I have the welder ...

Jorge

 

[1MAC]

The gas can carrier is the easiest part. Plan about an hour or two of welding.Lots of people here with welders.

 

[half k cruiser]

Gotta start somewhere @Jorgito

 

[Jorgito]

Maybe I could "weld" with jbweld . What do you think, should be strong also ...

 

[2fpower]

No.

 

[Jorgito]

Before I order three jerry can holder from 4x4 labs , does anybody have one not being used and willing to sell ?

Jorge