I did quite a bit of reading on here but could not find a thread that helped me identify what is happening with my CDL. I have a 1997 that is triple locked. I’ve been doing a lot of work on the vehicle lately and I replaced the CDL switch with a new one from rock auto because the CDl light was not indicating on the dash (and I didn’t hear the actuator engaging) with the old switch. I didn’t have any luck with the new switch, so I tried the paperclip trick. Sure enough, the light on the dash lit up. So, I’ve been been shifting into 4L whenever I get the chance. Tonight, I finally got the CDL dash light to appear, but I didn’t hear the actuator engage. I heard the relay clicking though. When the CDL light was on, my front and rear locker lights would only blink when I tried to engage them. Finally, the CDL light would only turn on when the 4L gear shifter was in a very specific spot when shifted in 4L. I had to move the shifter around a bit in order to find the sweet spot. Does this sound like a bad actuator, a bad switch, or a bad something else? Thanks for the help.