Android Micronavi unit questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

phishtaco

Cincinnati
Joined
Aug 7, 2003
Threads
282
Messages
2,704
Location
Cincinnati
I’ve had my MicroNavi Android unit for about a 1.5 years. I’ve got a few questions if anyone might have answers. May we need an all things Android radio thread sticky?
1) Is there a way to set the volume for start up? With the delay start up on these the radio can be super loud if you were driving with the windows down and then restart the next morning. The radio is also quite a bit louder than the CarPlay dongle.
2) My sound is okay and I have replaced the door speakers. How do you add an aftermarket amplifier to these radios? Any fancy adapters needed? I want to add maybe a 5 channel amp to power the doors and a small sub in the factory location.
 
I don't have micronavi but most android are the same.
In mine it would always default to specific volume on start up. You go to settings, car setting and then factory setting. Need a password but they are quite generic. You could change the default volume and also base volume for each source.

Most got 3 channel RCA and a remote turn on wire. Just wire your new amp to this RCA. Mine got factory Mark Levinson that only Power center speaker in acc position. I decided to keep the factory amp just for that.
 
I’ll give it a shot. Mine is non-ML
 

Users who are viewing this thread

Back
Top Bottom