aftermarket rims lugnut question

[mic6]

Hey guys,
I am soon installing procomp 5029s on my 2005 prado
Someone told me that the OEM lugnuts will not fit ?!?
Anyone has experience with that?
What lugnuts should I buy?

I attached a pic of the wheel

Thanks so much

 

[Yabedude]

You'll probably need acorn style lug nuts. Costco tire shop has gobs of selections.

 

[mic6]

You'll probably need acorn style lug nuts. Costco tire shop has gobs of selections.

thanks my friend
you think these will fit?

http://www.ebay.com/itm/MONSTER-LUG...Parts_Accessories&hash=item5d31eba47d&vxp=mtr

 

[The Jade Bean]

You'd be best to ask the wheel manufacturer, but as well as the above suggestion I'm pretty sure those will require more narrow lug nuts for the tight opening.




http://m.summitracing.com/search/product-line/gorilla-lug-nuts

Hope that helps!

-Daniel

 

[Yabedude]

If the wheel manufacturer can't help, I'd wait to receive the wheels and then have your installer advice.

 

[luanta]

I've installed quite a few different wheels on my 2007 FJ Cruiser and I believe its exactly the same as the Prado/GX470. Toyota makes a lug bolt thats kinda short so I ran into a problem when installing ProComp 7089 wheels before. The solution is quite simple, just order 12x1.5mm ET lug nuts. The ET is for "Extra Thread" and will give you about a quarter inch extra depth. I was able to get 8+ full turns on each lug. Highly recommend it. As for the lug socket, just carry a thin wall deep socket and a socket extension and breaker bar with you in the truck. doesn't take much room at all.