Adapter 700r4 (1 Viewer)

[jaydufe]

Okay so I have a 700r4 with 3spd cruiser adapter will that bolt up to the back of a 4l60e? Want to keep the electronics going to tranny !!!!

 

[gpfj40]

i’m no expert but there are 4 bolt and 6 bolt hex versions of these trannys. AA makes a short adaptor to go from 6 bolt hex to 4 bolt as I think 4 lot is the basis for their LC T case adaptors.

This is what my 4L60e and adaptors looks like, note the 2 pieces, one with 4 bolts bolting on to the shorter ring, one has 6 bolts attaching it to the tranny tail. If you had a 4 bolt tail housing on your present set up you would need the 4 to 6 adaptor to use a 4L60e and reuse your current adaptor.

 

[jaydufe]

My adapter does have the 4 going to the 700r4 tail shaft