97 FZJ80 Collecters Edition Part Out in NC Good Prices!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

7

72rockcruiser

10 Year 15 Year
Joined
Jan 25, 2007
Threads
111
Messages
1,102
Location
Charlotte, NC
Location
United States
SOLD and gone Thanks!
fs%20lc%20001.webp
fs%20lc%20003.webp
fs%20lc%20005.webp
 
Last edited:
These pics from the PO. I plan to take lots of pics shortly.
fs%20lc%20006.webp
fs%20lc%20010.webp
fs%20lc%20017.webp
 
Last edited:
Man, that one looks familiar!!

I need:
the little cubby hole above the radio/CD player
a couple of tow hooks/loops
the spring clamps from the PCV hose and the other slightly larger hose just behind the PCV (4 total)
the brace at the top of the oil dipstick tube that holds the charcoal canister line

shipped to 37643, paypal $ at the ready

Thanks!
 
Last edited:
jeffro109 said:
Man, that one looks familiar!!

I need:
the little cubby hole above the radio/CD player
a couple of tow hooks/loops
the spring clamps from the PCV hose and the other slightly larger hose just behind the PCV (4 total)
the brace at the top of the oil dipstick tube that holds the charcoal canister line

shipped to 37643, paypal $ at the ready

Thanks!
Click to expand...

It prob is..bought it off here. :D

Cool. Let me make sure its all there still. $40 shipped good?

:cheers:
 
Yeah, I was really interested in the whole rig, but it turned out to not be white.

Let's make sure of parts and their conditions first, thanks!
 
jeffro109 said:
Yeah, I was really interested in the whole rig, but it turned out to not be white.

Let's make sure of parts and their conditions first, thanks!
Click to expand...

Cool. thats what I meant. :cheers:

I do have a white 97 80 I could rob parts off of, and put this silver on after some rattle can action. what do you need white?
 
Is it lifted? If so I would love to get the lift.
 
pics...
DSC03107.webp
DSC03110.webp
DSC03109.webp
 
..........
DSC03108.webp
DSC03112.webp
 
phatairman said:
Interested in factory alarm - does it have it?
Click to expand...

Not sure, but my trail-only 97 80 does and doesnt much need it without doors usually on it anymore, let me see how much pita to remove, i will PM you a price.

Thanks!
 
Awesome. I will need the three components since this will be an addition to my 80 (Alarm ECU [under driver's seat], T wiring harness and the glass breakage sensor). I think that is all of the parts. Thanks again.
 
I would like one of the tan grab handles with mounting screws, like the one over the front passenger door, if its in good condition.
 
I'm looking for either:

1) The entire set of buttons from the HVAC controller.

or

2) The HVAC controller itself.

I got a little too aggressive with the heat gun when removing that crappy wood trim! :doh:

Also, looking for the trim piece surrounding the center vent/clock if it's in good condition.

Thanks!
HVAC small.webp
center trim small.webp
 
You must log in or register to reply here.

Share this page

Back
Top Bottom