For Sale 95 4-runner 1KZT 5 speed 4wd $7,800

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1995 4 runner, 4WD leather, power windows, sunroof,

was gas V-6 automatic.
recently installed Toyota 1KZT 3 litre turbo diesel and 5 speed

mechanical injector pump, no computer, 5 speed with solid mass flywheel

If you;ve been looking, you know how hard it is to find these engines.

clear GA title, title still says gas engine.

runs & drives, needs tires and finishing details, hooking up A/C etc.

vid here:
http://www.youtube.com/watch?v=4pQ6cbwWELs

also have extra 1KZT engine/5 speed for sale separately


Might consider trade for car , truck or motorcycle if the KBB private party retail is $7,500 to $8,000

or 68-69 Chevelle
70-71 Torino
70-74 Firebird
28-31 Model A

4runnerinside.webp


4runner engine.webp


4runner inside.webp
 
How much are you asking for the 1KZT and 5 speed? Did you do conversion? How complicated?
 
In Atlanta.

I'm asking $2500 for the other engine. 5 speed and tcase
They were pulled from a running driving 4 runner in England

Swaps not too bad. But ehought of a pain that im not gonna do anotherone
At the house im in now i dot have a garage or a basement

Lot easier than the computerized KZT
 
How many miles on the swap? What range of MPG are you seeing or expecting? How difficult will the A/C be to get running?
 
How many miles on the swap? What range of MPG are you seeing or expecting? How difficult will the A/C be to get running?

Not many miles on the swap yet, I cant get it smogged and registered, the A/C just needs a hose, Id expect a min of 20 in town and more on the hwy, but other peoples swaps have been all over the map.
 
Tried to pm you but your inbox is full.....

But here is my message.

Bro, I am interested in putting the 1kzt into a 1997 Tacoma. Being that both your 4runner and my Tacoma are 3rd gens, will the install consist of mainly the same fabrications to fit the drivetrain on the frame? The Tacoma is already 5spd but with the 2.7L engine, do you know if the 1kzt/5spd combo is approx the same length as the 2.7l/5spd? If so that is super cuz the shifter would be the correct position and if the tcases are the same length as well, then both prop shafts will not need to be adjusted.....
 
Tried to pm you but your inbox is full.....

But here is my message.

Bro, I am interested in putting the 1kzt into a 1997 Tacoma. Being that both your 4runner and my Tacoma are 3rd gens, will the install consist of mainly the same fabrications to fit the drivetrain on the frame? The Tacoma is already 5spd but with the 2.7L engine, do you know if the 1kzt/5spd combo is approx the same length as the 2.7l/5spd? If so that is super cuz the shifter would be the correct position and if the tcases are the same length as well, then both prop shafts will not need to be adjusted.....


I think a 97 Taco is a different gen than a 95 runner, I think the overall length is close, i think you;ll have to modify the crossmember/trans mount. and possibly the engine mounts as well.

search on the web and see if you can find someone thats done the swap.

I think dieseltoyz has done some.
 
roundhouse said:
wow, the PMs only hold 5 messages?

that fills up fast when you;re trying to sell something.

I think you get more as your post count increases, I could be wrong. I do know that if you buy a star you get lots and lots!
 
still available,

got the title changed to diesel.
so now exempt from emissions testing
got a tag on it,

got the exhaust done,
still messing with the A/C

some problem with the amplifier or something.
 
Hello, I'm new to forums but not to trucks. I'm interested in your Engine/trans/transfer combo. Do you still have it?
 
Still have the 1kzt engine and trans for sale? I'm very interested. Pm me!

Extra engines and trans are sold

Still have the 95 runner for sale

Not much interest in it

Looks like its gonna be my 15 yr olds first car...
 

Users who are viewing this thread

Back
Top Bottom