Do you have an after market bumper or is it stock?
For Sale 91-97 80 series parts
- Thread starter Bowser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
mjbcmt said:
Also any sliders or skid plate?
Looking for the following parts to fit a 1992 FJ80 Champagne/brown. parts to be shipped to Renton Washington 98056:
A: drivers side visor (brown), but any color would be ok at this point.
B: tailgate latch release (black plastic lever)
C: Passenger rearview mirror (champagne color) including glass and pivoting housing. Mine seems to be held on with bondo
D: black plastic steering column cover (top and bottom)
E: Center Console lide with hinge and latch (brown)
F: Factory jack and lug wrench set
A: drivers side visor (brown), but any color would be ok at this point.
B: tailgate latch release (black plastic lever)
C: Passenger rearview mirror (champagne color) including glass and pivoting housing. Mine seems to be held on with bondo
D: black plastic steering column cover (top and bottom)
E: Center Console lide with hinge and latch (brown)
F: Factory jack and lug wrench set
Looking for the sunroof control panel off a LX450 (its got the dome light and all in it including tilt and in out switches).
Jeremy
Jeremy
Parts to 35244
Hi, I'm looking for the following shipped to 35244:
- outside lower window black plastic trim for all four doors but particularly for the drivers rear and passenger front. I need all the little clips also that help attach them to the door sheet metal.
-spare tire jack tools if you've got them
-passenger side rear door locking unit... like the actuator/solenid thing.
-if you have some of the little plastic screws that hold down the middle row step plates, I need those for the oak color interior
-A LC rear bumper in good shape. I need the flaps, bumper sides, and the aluminum step.
-if you've got e-locker parts, like switch, ECU, I'd be interested in knowing how much you want for them.
I'll PM you as well. Thanks.
Hi, I'm looking for the following shipped to 35244:
- outside lower window black plastic trim for all four doors but particularly for the drivers rear and passenger front. I need all the little clips also that help attach them to the door sheet metal.
-spare tire jack tools if you've got them
-passenger side rear door locking unit... like the actuator/solenid thing.
-if you have some of the little plastic screws that hold down the middle row step plates, I need those for the oak color interior
-A LC rear bumper in good shape. I need the flaps, bumper sides, and the aluminum step.
-if you've got e-locker parts, like switch, ECU, I'd be interested in knowing how much you want for them.
I'll PM you as well. Thanks.
Pm sent!
PM sent about front grill silver "T" emblem from a 96-97 FZJ80.
PM & email sent...Thanks!
Parts
I was checking to see if you had the right and left turn signals under the headlamps?
Thanks,
Mike
I was checking to see if you had the right and left turn signals under the headlamps?
Thanks,
Mike
Hi,
Looking for the engine compartment Relay/Fuse box mounting bracket off of a 91-92 FJ80.
PM sent, and picture below.
Steve
Looking for the engine compartment Relay/Fuse box mounting bracket off of a 91-92 FJ80.
PM sent, and picture below.
Steve
LSP + BV
Looking for a Load Sensing Porportioning and Bypass Valve.
Part of the rear braking system.
Shipping to 32563
Thanks
Looking for a Load Sensing Porportioning and Bypass Valve.
Part of the rear braking system.
Shipping to 32563
Thanks
- Joined
- Dec 20, 2011
- Threads
- 0
- Messages
- 2
need a few things
I have a 97 40th and i use it so i need a tail light lens a drivers front flair to running board transition boot, possibly a set of front seats two tone brown leather maybe a steering wheel jamesembry@live.com
I have a 97 40th and i use it so i need a tail light lens a drivers front flair to running board transition boot, possibly a set of front seats two tone brown leather maybe a steering wheel jamesembry@live.com
Looking for a rear driveshaft for a 97