I'm putting my FJ40 up for sale
The owner of the company I'm moonlighting for called me this morning. He wants to talk to me about running his company here, while he starts another in Atlanta and eventually moves there to retire. (he's already bought a house there I found out)
This could be a great opportunity for me and my family down the road. For the foreseeable future though I'd be taking a significant pay decrease and walking away from my primary job.
My wife is the one who told me to buy another 40 and she's not sure she wants it to go. She always comments on how much attention she gets when driving around town. But, as you all know these are mostly adult toys to us all and the extra money would be a greater comfort in the bank not in the driveway.
So.......What this isn't:
Rare
Barn Find
Restored
Frame Off
Original
Showroom Condition
Great Candidate for Restoration
What is is and has:
1975 Toyota FJ40 Landcruiser, SBC 350, HEI Distrubutor, California BAR Sticker, Rams Horn Manifolds, Saginaw Power Steering, 4 Wheel Disc Brakes,Toyota 4speed Transmission and Transfer Case, Advanced Adaptors Rear Crossmember Mount, 4 inch Con-Fer lift, Full Family roll cage
(all done by a PO before the guy I purchased it from)
What I added
Brand New Parts listed below include:
Edelbrock Performer Intake
Edelbrock 1405 Carburetor (600 CFM)
Edelbrock 1 inch poly carb spacer (prevent fuel boiling)
Edelbrock Carb Off Road Kit
MSD Plug Wires
Champion Aluminum Radiator
7 blade offset Corvette fan
Hayden Heavy Duty fan clutch
Hoses and belts
Thermostat and Housing
Round Eyes Headlights
Advanced Adapters Bell Housing
11 inch Clutch (from Downey)
Low Profile Pressure Plate (from Downey)
Advanced Adapters Throwout Bearing
Front Bearings in Transmission
Clutch Master Cylinder and line
Clutch Slave Cylinder and line
High Torque Starter
Rebuilt Power Steering pump
Procar 90 Seats
Tuffy Center Console
Bestop Rear Seat
Front and Rear Seatbelts
Door Rubber
Heater Core
Heater Rebuild Kit
4+ Front Bumper
Bilstein Shocks
Rear lenses
Bumperettes
Brand new and included but not installed , new front door window parts and felts, new heater valve
Also:
Warn 8274 Winch
All gauges work
All lights work
33x10.5 BFG Mud Terrains (75% tread left)
This is a solid 40, reliable and enjoyable right away. It does have some dents/dings from a PO and some body work behind the drivers door and also some PO cut the rocker panels about an inch.
It is almost rust free, 99% surface, Please see pics
I'm not looking to part it out or trade for anything but cash
Asking Price $9500
Located in Santa Clarita CA
It's not up for sale locally yet just here.
The owner of the company I'm moonlighting for called me this morning. He wants to talk to me about running his company here, while he starts another in Atlanta and eventually moves there to retire. (he's already bought a house there I found out)
This could be a great opportunity for me and my family down the road. For the foreseeable future though I'd be taking a significant pay decrease and walking away from my primary job.
My wife is the one who told me to buy another 40 and she's not sure she wants it to go. She always comments on how much attention she gets when driving around town. But, as you all know these are mostly adult toys to us all and the extra money would be a greater comfort in the bank not in the driveway.
So.......What this isn't:
Rare
Barn Find
Restored
Frame Off
Original
Showroom Condition
Great Candidate for Restoration
What is is and has:
1975 Toyota FJ40 Landcruiser, SBC 350, HEI Distrubutor, California BAR Sticker, Rams Horn Manifolds, Saginaw Power Steering, 4 Wheel Disc Brakes,Toyota 4speed Transmission and Transfer Case, Advanced Adaptors Rear Crossmember Mount, 4 inch Con-Fer lift, Full Family roll cage
(all done by a PO before the guy I purchased it from)
What I added
Brand New Parts listed below include:
Edelbrock Performer Intake
Edelbrock 1405 Carburetor (600 CFM)
Edelbrock 1 inch poly carb spacer (prevent fuel boiling)
Edelbrock Carb Off Road Kit
MSD Plug Wires
Champion Aluminum Radiator
7 blade offset Corvette fan
Hayden Heavy Duty fan clutch
Hoses and belts
Thermostat and Housing
Round Eyes Headlights
Advanced Adapters Bell Housing
11 inch Clutch (from Downey)
Low Profile Pressure Plate (from Downey)
Advanced Adapters Throwout Bearing
Front Bearings in Transmission
Clutch Master Cylinder and line
Clutch Slave Cylinder and line
High Torque Starter
Rebuilt Power Steering pump
Procar 90 Seats
Tuffy Center Console
Bestop Rear Seat
Front and Rear Seatbelts
Door Rubber
Heater Core
Heater Rebuild Kit
4+ Front Bumper
Bilstein Shocks
Rear lenses
Bumperettes
Brand new and included but not installed , new front door window parts and felts, new heater valve
Also:
Warn 8274 Winch
All gauges work
All lights work
33x10.5 BFG Mud Terrains (75% tread left)
This is a solid 40, reliable and enjoyable right away. It does have some dents/dings from a PO and some body work behind the drivers door and also some PO cut the rocker panels about an inch.
It is almost rust free, 99% surface, Please see pics
I'm not looking to part it out or trade for anything but cash
Asking Price $9500
Located in Santa Clarita CA
It's not up for sale locally yet just here.
Last edited:
