For Sale 75 fj40 (priced to sell!)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Location
United States
Didn't have a chance to wash it and our road is a little muddy rite now so the pics don't do the paint justice. I'm thinking about getting rid of it because my wife and I just had a baby and now I need a more family oriented rig. Also included will be the NP205 SM465 combo, good flywheel, good clutch. The np205 is dissasembled rite now because I am going to rebuild it, clean it, paint etc. The transfer case is in great shape and I am regreting taking it apart because it would have lasted a long time with no attention OH Well. So I'm guessing the tranny is in the same condition from what I can tell with the parts that are exposed(output bearing output shaft) This is the case. Also I will include the original tire carrier which is in great shape but it is white along with a gas can/high lift carrier that goes well with the tire carrier in the same condition, original gauge cluster, steering wheel, running boards, one beard racing suspension seat, two sets of like new 5 points, a rear bench seat, spare spider gears, ring and pinion, 2 housings( everything for a spare 3rd), bikini top that is pretty worn out, 36" spare with decent tread for a back up( I have 3 more if you want em there Irok 36 13.5 15's) The motor is a 305 that is pretty suped up, lots of power. New edelbrock intake, optima battery etc. could use new plugs and wires. Cruiser has a fairly new rear third in it ( 2000 miles or so) something is making a clicking sound in the clutch area, not quite sure what it is but my guess is a pilot bearing, I wasn't too worried about it because I have an np205 sm465 with new clutch, flywheel etc. The wiring is original and could definatley benefit from some TLC. Needs new indicator switch on the column( I broke it off with my knee, its in a horrible spot!) The body is in great shape, there is some rust on the rear quarter pannel's, and left front fender has a crack that is hard to see. Top is in excellent shape, no rust what so ever ( PO did drill holes in it for the roof rack which I don't like, but hey it looks cool.) Tires are in great shape 85-90% tread. Front axle leaks a little at the knukles, transfer case also leeks a little. Overall this rig runs great and will be really hard to let go. and Ive come to a blank. Thanks, Cody feel free to call with any questions. (928)308-0201 $6,000 OBO!
DSC02194.webp
 
Last edited:
Location?

Interior, under-hood, rear and frame shots?
 
PM'd you.
 
Heres some pics where the rust was. When I stripped it down for paint the rear quarter panels were heavily bondo'd so I got rid of that, sprayed the bare steel with apoxy primer and re-bondo'd the holes. I know its not the best way but being my daily driver I prep'd and painted the whole thing in my garage in 2 days. So needless to say the bondo has cracked and here ya go. As Far as the front fender pic I didn't sand down to steel on that one and isn't really noticeable but heres a pic of that as well. Also I forgot to mention in the original post it does have 4 Wheel disks. Let me know if you guys have any more questions. Thanks, Cody
DSC02269.webp
DSC02270.webp
DSC02271.webp
 
any interest in a 1996 lexus ls400 for a trade?

any pictures of the frame and of the floors front and rear. thanks
 
Sorry not looking to trade got a new rig and need to sell this ASAP! Motivated seller, make offer.
 

Users who are viewing this thread

Back
Top Bottom