For Sale 70 series lhd interior parts for conversions or builds

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

joekatana

joekatana

GOLD Star
10 Year 15 Year
Joined
May 30, 2008
Threads
563
Messages
5,928
Location
Texas
Location
United States
I have put together 3 almost complete lhd 70 series dash assemblies with the pedals , steering column, blower motor, heater core and all the duct work. I would say these are 95% complete and usable, as these come from part outs there will always be something that got some minor damage and the bolts and screws have disappeared over time.

I have 3 of them and the one on top is 1500$, middle one 1400$ and lower one 1300$ , this is based just on appearance not completeness.

steering wheel and gauge cluster are not included but I have several available.
These will be ideal to start a lhd to rhd conversion or build one of the 79 series cabs.

649D2213-0CB4-477E-9389-CBDE37534F6C.webp
ECBE78B9-4F65-4A34-8324-FCDC19386F8F.webp
323C3D0F-BB1B-4563-8952-1ED45E4EAE19.webp
C186BA49-D6E3-4D7D-AC31-660A8069022E.webp
 
Joe - would you please pm me pics of 70 series cluster that you have. I'm looking for one.
Thanks
 
Currently Pricing out all of the bits needed so I can determine the financial outlay for converting my 80 to a 70 series pickup.
 
SoCal FZJ80 said:
Currently Pricing out all of the bits needed so I can determine the financial outlay for converting my 80 to a 70 series pickup.
Click to expand...

Make sure to sit down when you get the total of all the big and small parts and just remember you won't know if they are actually available until you ordered them and they get delivered , I had already a lot of refunds on parts ordered from Japan and the Middle East ;-)
 
I suggest you have alcohol on hand while you add up the numbers. :)
 
Gun Runner 5 said:
I suggest you have alcohol on hand while you add up the numbers. :)
Click to expand...
Looking that way, better put down my coffee now... :beer:

Most likely stick to whatever I need to make a basic functioning vehicle first.. take the next few years to finish the details.
 
SoCal FZJ80 said:
Looking that way, better put down my coffee now... :beer:

Most likely stick to whatever I need to make a basic functioning vehicle first.. take the next few years to finish the details.
Click to expand...

That sounds like a decent plan , there are 3 dashes available in the US and 12 cabs for sale , I had some of these in the past but I stopped parting out 70's in Europe so when these are gone that will be it.
 
SoCal FZJ80 said:
Currently Pricing out all of the bits needed so I can determine the financial outlay for converting my 80 to a 70 series pickup.
Click to expand...
A good read for anyone considering this route........ This thread documents his second build. The first build is equally interesting.
forum.ih8mud.com

Build - Let's build a 79 Series from parts...

As a follow up to my Builds - Just another 79 build..... I thought I'd do a new thread to document the build of our LC79#2. This one won't be nearly as complex as the first one.....this was an uncompleted rolling truck so the hard work was done. This body was part of the same group of bodies...
forum.ih8mud.com forum.ih8mud.com

*** Joe, sorry for the temporary hijack.
 
Any chance you’ve got one of those 12 cabs to go along with one of these sets :)
 
Do you have a front clip to convert my 1990 HZJ77 to LHD?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom