ARCHIVE 70 Series Axle Cheatsheet Poster

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

For you 70 series guys/gals this is a fun little game I like to play with Joey. It's called "Let's see how many days we can keep Joey without sleep by finding a typo that he didn't. Then not telling him." :rofl:

Then again, there might not be a typo...
 
LS1FJ40 said:
For you 70 series guys/gals this is a fun little game I like to play with Joey. It's called "Let's see how many days we can keep Joey without sleep by finding a typo that he didn't. Then not telling him." :rofl:

Then again, there might not be a typo...
Click to expand...

You suck!
 
NLXTACY said:
I freaking hate you :flipoff2:
Click to expand...

Seriously, what are the chances that I happened to jump over to the 70 series section to see what all is going on and this happens to be the first thread!?!?!

The funniest was when I found typos on your website! I could've had you eating aderall for months trying to find those!

For the record, this is really cool. I enjoy wearing my 80 series knuckle tshirt and having people ask me what it is. I like it so much that I ordered a second one because I said "I can't believe I don't have this!" and I already did. :rofl:
 
Sorry for hijacking...

4EFE8AF5-23E4-48C4-87B1-5D90D0EC857C.webp


For the record, I highly recommend anything Joey makes. All top quality.

Joey, do you have a 70 Series fire extinguisher mount?

B6221902-AB9E-449A-B168-C68B7E2EF50C.webp
 
I keep trying to buy the poster but I keep getting the following error messages:

"Checkout temporarily unavailable"

&

"Unable to get property 'getSubmitOrderError' of undefined or null reference"

Edit: I got email confirmation of the order. I guess it went through.
 
Last edited:
FJ73Texas said:
I keep trying to buy the poster but I keep getting the following error messages:

"Checkout temporarily unavailable"

&

"Unable to get property 'getSubmitOrderError' of undefined or null reference"

Edit: I got email confirmation of the order. I guess it went through.
Click to expand...

Went thru ok on my end. I'll look into the error.
 
here is a pic of the 80 Series fire extinguisher mount. Shortly after I installed it I had to use it at a car accident. Put out a fire under the hood where the driver was trapped in the car. Highly recommend.

You can’t see but I also have the liner (under the lid). I keep 10,12,13,15mm gear wrenches, JIS and flat screwdrivers in there.

It doesn’t interfere with seat travel. Can be all the way forward or back.

76D6BED8-E414-4CE1-83BF-91AB3452F240.webp
 
So, if this goes only up to 1/1990, is there one that would accurately depict my '92? For instance, this one doesn't appear to show the electronic locking hubs. Should I use the 80-series poster instead?
 
SHREDwagon said:
What the heck do you need 13 & 15mm wrenches for?
Click to expand...

The open end of a 13mm wrench is used for the inspection Port on the knuckles.

I don’t remember what/why I have a 15mm in there. I keep a fairly full set of tools on board in the back as well, in all three 80s. Just in case. I usually end up needing them for others rather than myself or other Land Cruisers.
 
LS1FJ40 said:
The open end of a 13mm wrench is used for the inspection Port on the knuckles.

I don’t remember what/why I have a 15mm in there. I keep a fairly full set of tools on board in the back as well, in all three 80s. Just in case. I usually end up needing them for others rather than myself or other Land Cruisers.
Click to expand...

Knuckle inspection port is a 14mm wrench. ;)
 
beno said:
Knuckle inspection port is a 14mm wrench. ;)
Click to expand...

Wrong!! I just checked because I questioned my statement. Mine are 13mm. I will post a video for proof! :p
 
They are technically British Pipe Thread. So, 1/2" technically. 13mm is ideal. But why carry a 13mm when 14mm works?

90345-53007 They are the same for the 80 knuckle as well as the 7x/6x/4x etc.
 
beno said:
They are technically British Pipe Thread. So, 1/2" technically. 13mm is ideal. But why carry a 13mm when 14mm works?

90345-53007 They are the same for the 80 knuckle as well as the 7x/6x/4x etc.
Click to expand...

I would like it noted that I was correct! Can I get this stickied please?!?! Thanks!

I may or may not have screen shot this for blowing up and hanging in my garage...

I have plenty of room. One 13mm wrench is not going to push me over the weight limit or take away space from something more critical. Especially since this storage area didn’t even exist from the factory.
 
You must log in or register to reply here.

Similar threads

landcruisnman
SOLD Brake parts 70 series axles
Replies
0
Views
241
landcruisnman
landcruisnman
Eduardo Gamboa
Wanted 40/70 series full float rear axles
Replies
0
Views
277
Eduardo Gamboa
Eduardo Gamboa
WidespreadLC
Long Time Lurker/First Time Poster
Replies
5
Views
369
ScotyDosentKnow
ScotyDosentKnow
Evanfire
Wanted 70 series door left side
Replies
2
Views
586
Evanfire
Evanfire

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom