I'm trying to replace the leaking seals on my transfer case front and rear output shafts. I have NOK numbers AD2651 and TB387411X3 but can't seen to cross them to anything. Any ideas?
Thanks
Thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I've been to SOR and Cruiser and Rock and tried to get to NOK. SOR has the wrong seal to replace the AD2651 and a replacement for the other that's not a match but may work.When asking for help year, model and market helps. Have you looked in the online catalogs like sor.com they have good schematics to help you figure out what you need. Other vendors up top have better prices, worth shopping around.
FJ40, FJ45 and FJ55 Transfercase, Gears, Gaskets and Seals 1963-8/80 Land Cruiser - Specter Off-Road
Toyota Land Cruiser parts since 1983. From the oldest FJ25 and to the newest Land Cruiser, Non USA or domestic 40 Series, 60 Series 80 Series or 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in...www.sor.com
Land Cruiser 3 Speed Transmission 1963-1973 - Specter Off-Road
Toyota Land Cruiser parts since 1983. From the oldest FJ25 and to the newest Land Cruiser, Non USA or domestic 40 Series, 60 Series 80 Series or 100 Series, SOR has the largest selection of top quality new and used OEM and aftermarket Land Cruiser parts in stock in the world. Specializing in...www.sor.com
My microfiche set start date is 03/69, so I can't be of much help here. I pretty sure there's a couple of guys on here who know.Maybe timmyinthewell has and will post the phish for you.
Perhaps the free factory download manuals might have what you need
Land Cruiser Factory Service Manuals (FSMs)
Factory service manuals (FSMs) for your Toyota Land Cruiser ! From the 1950s to the present!www.cruisercult.com
Thank you, that should do it. IDK how I missed that. Much appreciated.A three speed transfer case is a three speed transfer case, seals are interchangeable I’ve bought the same kits, and successfully rebuilt 66, 68 and 70 cases. The biggest difference you will see is replacement of the vacuum front engagement with a lever engagement in later model yeaers.
Just get a gasket kit for the three speed transfer case…it’ll come with correct seals. They may not be NOK, but they’re good seals.