60 to 62 bumper swaps?

[fjdemon]

I have a 62 series with a slee offroad rear bumper w/ tire carrier and I have a ARB bumper with Warn 9000 up front. I want to swap it to my 60 series, should work right? Will my stock 60 bumpers fit on the 62? Thanks

 

[weak-link]

I believe there are a few small changes.

If you still have the rear x-member is different between the two, not a lot but a little.

and I think the front rails are a little different.

try it and let us know the outcome

 

[lynchmob]

stock rear 60 bumper will work on your 62. Front bumpers are different.

You should be able to put the arb from the 62 on the 60 though. You either have to add or remove spacers - i forgot which...

 

[fjdemon]

Thanks, I think you have to add spacers on the 60 to make the 62 ARB work. I had no clue on the back, so thanks!

 

[RockDoc]

Thanks, I think you have to add spacers on the 60 to make the 62 ARB work. I had no clue on the back, so thanks!

I think you're right, I didn't use any spacers on my 62.

 

[cruiser88]

Yes you need spacers for the 60 but not the 62.(front bumper)

I have ARB spacers if you need them.......just pay the ride

 

[fjdemon]

Yes you need spacers for the 60 but not the 62.(front bumper)

I have ARB spacers if you need them.......just pay the ride

Yes!!!! excellent. I'll pay you via paypal, let me know PM being sent. Thanks.

 

[Cruiserdrew]

You can make those spacers super easy with about 2 inches of tube. You just need to space up from the wing to the mount on the bumper itself, and run a 1 inch longer bolt. 10 minutes work.

 

[fjdemon]

Yes you need spacers for the 60 but not the 62.(front bumper)

I have ARB spacers if you need them.......just pay the ride

Thanks! Got them a few days back. Much Appreciated, still not sure if I will swap them yet, Maybe. Thanks again!!!!!!!!!

 

[cruiser88]

Thanks! Got them a few days back. Much Appreciated, still not sure if I will swap them yet, Maybe. Thanks again!!!!!!!!!