6 lug TRD Rock Warriors on an 80 series (1 Viewer)

[3andathird]

Hey everyone, scored a set of 6 lug TRD Rock Warriors. The person I picked them up from had them on a 4th gen 4runner. Before I get my hands dirty, can anyone tell me if these things will fit without issue, or if I'll need spacers etc. to make them work? This is the only photo I could find of an 80 series running them.

Thanks in advance.

 

[n0rth]

I had the Bronze TRD faux bead locks 16’s and ran them on my 80 you’ll need spacers to make it work.

 

[3andathird]

I had the Bronze TRD faux bead locks 16’s and ran them on my 80 you’ll need spacers to make it work.

Thank you. Do you recall what size spacer you were running, and did you have to switch to longer studs?

 

[n0rth]

It’s been awhile since I test fit that wheel from my Tacoma. I tried both 1.25” and 1.0”, due to the hub bore the 1.25 worked 1.0 did not. Stock studs worked fine ultimately I ended up running a set of Tundra/Sequoia 17’s with 1.25” spacers which should work with the wheels you have.