3spd. T-case parts needed

[RUSH55]

Hey guys, found out that I need a few more items for my sm420/3spd. t-case conversion. First I need a 3spd. front driveshaft female slip yoke with the flange. Also found out that the inner race on the nose cone spun, so I need a decent 3spd. nose cone. Anyone have these parts? If not I'll prolly just call Kurt

 

[lcwizard]

parts

try tim hill, 520-616-0304

 

[lcwizard]

why

why the female slip. the yoke off the 77 case will fit and thus your stock driveshaft. Or don't you have those anymore

 

[RUSH55]

I'm running John Pardi's plate adapter, and he recomends that for the least amount of case grinding, to use the 3 spd stuff cause it's a little smaller. Having to use a smaller u-joint is the downfall, but that's OK.
I was able to save the nose cone, by pock-marking the aluminum race seat with a sharp center punch. The race fits tight now.

 

[Tools R Us]

I was able to save the nose cone, by pock-marking the aluminum race seat with a sharp center punch. The race fits tight now.

If your going to do that, clean the case and race, brake cleaner works well and install the race with red Loc-tite on both parts. The Loc-tite fills the gaps and holds the race rock solid.