Trade 3B/12V EDIC and Super glow systems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 5, 2008
Threads
60
Messages
673
Location
Kalispell, MT
Location
United States
ALL IS SOLD



I have a EDIC motor and relay with the pigtails and wire. Also I have a Super glow system out of the same rig. It is from a 1983 BJ60.

I pulled the engine and put it in my FJ40 and didn't want to mess with wiring the systems up. I could not get the EDIC to work correctly and gave up installing it. I know for a fact the motor is good, but the relay might be suspect. I am not good with wiring so I gave up. The BJ60 an perfect before I pulled the engine. Here is the link to the help thread with the info of what I tried to get it to work.

https://forum.ih8mud.com/diesel-tech-24-volts-systems/417181-fried-my-edic-relay.html

The super glow system works and I did no even attempt to install it.

I would love to trade for a 3B turbo exhaust manifold. If it is homemade that is ok, or if you want to make it.
If you want to pay I'll do $200 for the EDIC system and $100 for the Super Glow system.

Let me know if this is priced too high. Parts are in Kalispell MT and buyer is responsible for shipping. I should be able to do flat rate from USPS.
photo 1.webp
photo 2.webp
photo 4.webp
 
Last edited:
To clear things up: I have not actually tested the relay to see if it is bad. I assumed it was bad because I know the motor is good and I tried every combination I could think of to make it work and it would not.
Because of that I am pricing it as if it is just the motor that works. I hope that makes sense.

Isaac
 
Back
Top Bottom