33x12.50R17 tires fitted

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 17, 2007
Threads
40
Messages
1,407
Location
Finland
Now I´ve tryed them under. Tires are Cooper Discoverer STT 33x12.50R17LT and wheels are Dotz Luxor 8x17", offset 0. Need some lift and fender trimming until they´ve room to turn/move up. Pictures below without any modifications (just front mud guards taken off):
oeda0.jpg


oikealtabi8.jpg


takaadh5.jpg


etucl3.jpg


rubbingxr1.jpg
 
With OME lift . ?

No. Cost too much. 1.25" Daystar top plate spacers are purchaced and 2" steering shaft extension too (for 2" bodylift).

This is my vision (1.25" front spacers+2" bl), very awkward paint-job:
korotettunapienitr1.jpg
 
Last edited:
Are you getting any rubbing at full compression or at full steering lock?

With lifts (2" body+1" spacers) at full compression, at 3/4 steering position they rub to inner fender plastic. Same situation like without any lift:
rubbingxr1.jpg
.

I have to take a little of the corner and remould the plastic. At normal driving, no rubbing.
 

Users who are viewing this thread

Back
Top Bottom