- Location
- United States
Its an 05 SR5 V8 with just shy of 163k
So far, while owning it I have done:
-Toytec 112-620 front coils with a spacer
-Toytec 2.0HD rear coils
-Bilstein 5100s front and rear
-SPC UCAs
-Spidertrax 1.25" spacers front and rear.
-SPC UCA's
-light bar and pods
-custom built roof rack
-RPM Fab front bumper
-Double din head unit
-295 STT Pro's with steel black wheels. Excellent tread life left. Basically a 33"
-Blue LED lighting in doors, and dome lights.
The timing belt has been done, I had tank dropped new fuel pump put in, CV axles im sure im missing something. I can get service records for most of it if interested.
As for the interior, I have back pain often, so I got rid of the factory front seats and switched them out for some seats out of an old LeBaron, which are much more comfortable even though they look out of place. They are bolted down in the front, and I switched all over the airbag sensors and s*** from the stock seats, so I was able to safely pass inspection.
Repair wise, I have had both CVs replaced, radiator, timing belt, and a few other little things I am forgetting. The motor runs excellent, the transmission is excellent. Routine maintenance always done, along with the brakes at some point. I can get a list of work done by the shop if desired. Some papers I may be missing, but I can always get you in contact with who worked on it.
VIN# upon request, if you'd like to check the vehicle history.
She has some mud, some scratches, but I will be detailing the truck after I get back from PA this weekend. There is some trail damage in the last picture, along with some on the drivers door, but it is on the plastic trim pieces, which can be easily replaced or repaired. She is used on the trails, I took her stock and after I lifted it, and she does great.
It is time to go bigger and more capable and with a solid axle. I am looking for a built 96-97 Land Cruiser with the factory lockers-front and rear. If you have one and might be possibly interested in trading, please drop me a message via PM, or comment here and I will get ahold of you.
She has been great offroad, but It is time to go bigger and more capable and solid axle. I am looking for a built 96-97 Land Cruiser with the factory lockers-front and rear. If you have one and might be possibly interested in trading, please drop me a message via PM, or comment here and I will get ahold of you.
I am located in Long Island, NY. I wouldn't hesitate to take the Runner out of state..she has been across country twice
So far, while owning it I have done:
-Toytec 112-620 front coils with a spacer
-Toytec 2.0HD rear coils
-Bilstein 5100s front and rear
-SPC UCAs
-Spidertrax 1.25" spacers front and rear.
-SPC UCA's
-light bar and pods
-custom built roof rack
-RPM Fab front bumper
-Double din head unit
-295 STT Pro's with steel black wheels. Excellent tread life left. Basically a 33"
-Blue LED lighting in doors, and dome lights.
The timing belt has been done, I had tank dropped new fuel pump put in, CV axles im sure im missing something. I can get service records for most of it if interested.
As for the interior, I have back pain often, so I got rid of the factory front seats and switched them out for some seats out of an old LeBaron, which are much more comfortable even though they look out of place. They are bolted down in the front, and I switched all over the airbag sensors and s*** from the stock seats, so I was able to safely pass inspection.
Repair wise, I have had both CVs replaced, radiator, timing belt, and a few other little things I am forgetting. The motor runs excellent, the transmission is excellent. Routine maintenance always done, along with the brakes at some point. I can get a list of work done by the shop if desired. Some papers I may be missing, but I can always get you in contact with who worked on it.
VIN# upon request, if you'd like to check the vehicle history.
She has some mud, some scratches, but I will be detailing the truck after I get back from PA this weekend. There is some trail damage in the last picture, along with some on the drivers door, but it is on the plastic trim pieces, which can be easily replaced or repaired. She is used on the trails, I took her stock and after I lifted it, and she does great.
It is time to go bigger and more capable and with a solid axle. I am looking for a built 96-97 Land Cruiser with the factory lockers-front and rear. If you have one and might be possibly interested in trading, please drop me a message via PM, or comment here and I will get ahold of you.
She has been great offroad, but It is time to go bigger and more capable and solid axle. I am looking for a built 96-97 Land Cruiser with the factory lockers-front and rear. If you have one and might be possibly interested in trading, please drop me a message via PM, or comment here and I will get ahold of you.
I am located in Long Island, NY. I wouldn't hesitate to take the Runner out of state..she has been across country twice
Last edited: