This is the buggy that I competed with in the 2003 EROCC events. The same one that is in the 04 July Pertersen's 4wheel & off road page 24. It is a two seater frame with a short 2x4" box base and 1.5" DOM tubing frame. Front and rear suspension is four link and coil overs. below is a list of all the parts used on it...
engine
22re injected 4cyl
header
k&n air filter
aluminum radiator with electric fan
10 gal aluminum fuel cell
stainless steel braided fuel lines and AN fittings
fuel filter with stainless steel element
Holly fuel pump
dual circuit oil cooler with fan for engine oil and hyd steering
1984 toyota front axel
ARB locker with ARB air comp.
longfield axels and one spare
dual end hyd steer ram
Howe res with oil filter
Howe pump
vented rotors and calipers
4:88gears and removable 1.5" wheel spacers on both axels
1988 toyota v6 rear axel
disc brakes
detroit locker
toyota 5sp trans
toyota front t-case 1/2 with OTT adaptor and dana 300
heavy dana300 output shaft
twin stick shifter
custom yokes to fit toyota drive shafts
two Kirkey seats and covers
wilwood clutch/brake pedal with balance bar
all 3 wilwood master cly.s
Crow 5 points
Aluminum bead lock wheels
37" BFG krawlers reds
Racerunner coil overs
QA1 heims
painless switch panel
You get all of that and all of the spare parts that I have for $15,000. If you have any questions or an offer you would like to make, please call Jeff Edison at 513-200-9531 or email jedison84@earthlink.net Thank you for looking.
engine
22re injected 4cyl
header
k&n air filter
aluminum radiator with electric fan
10 gal aluminum fuel cell
stainless steel braided fuel lines and AN fittings
fuel filter with stainless steel element
Holly fuel pump
dual circuit oil cooler with fan for engine oil and hyd steering
1984 toyota front axel
ARB locker with ARB air comp.
longfield axels and one spare
dual end hyd steer ram
Howe res with oil filter
Howe pump
vented rotors and calipers
4:88gears and removable 1.5" wheel spacers on both axels
1988 toyota v6 rear axel
disc brakes
detroit locker
toyota 5sp trans
toyota front t-case 1/2 with OTT adaptor and dana 300
heavy dana300 output shaft
twin stick shifter
custom yokes to fit toyota drive shafts
two Kirkey seats and covers
wilwood clutch/brake pedal with balance bar
all 3 wilwood master cly.s
Crow 5 points
Aluminum bead lock wheels
37" BFG krawlers reds
Racerunner coil overs
QA1 heims
painless switch panel
You get all of that and all of the spare parts that I have for $15,000. If you have any questions or an offer you would like to make, please call Jeff Edison at 513-200-9531 or email jedison84@earthlink.net Thank you for looking.
