Sweet setup. I may just buy the drawers for the Sequoia and fab my wings to fit.
200 Series tech and classifieds. (2 Viewers)
- Thread starter MEMCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
REKCUT
SILVER Star
From the size of that fridge i see why you needed more power. That thing is massive
I haul bodies on the side (it’s Jason’s fault)
They have a generic setup that’s 39” wide and 40” deep. Check that size out too
For the past week I have been getting to intimately know my new to me 200. In preparation for a 2 week cross country road/camping trip I figured it was only appropriate to wait until the last minute to add a Dobinson MMR suspension, Goose Gear rear drawer system, and a full 12v electrical upgrade with a switch pros. I’m going (try) to do an in depth documentation of my installs as I couldn’t find much info for 2016+ vehicles for some some of the upgrades.
Heres an easy mod if you deleted the 3rd row
I used the C pillar seat belt threaded hole to mount a Ram mount 1” ball head. I used the factory seat belt bolt and cut the head off in my lathe and then drilled an tapped a 1/2-20 hole in it.
I used a Baja design S1 scene light. It’s super bright but not over bearing bright.
Heres an easy mod if you deleted the 3rd row
I used the C pillar seat belt threaded hole to mount a Ram mount 1” ball head. I used the factory seat belt bolt and cut the head off in my lathe and then drilled an tapped a 1/2-20 hole in it.
I used a Baja design S1 scene light. It’s super bright but not over bearing bright.
I made a road trip up to Ozark Outfitters to drop some 3rds and pick up some parts. While I was there Jason was kind enough to swap out the super big SnowMaster fridge I had purchased from him for a much better sized (for myself) National Luna 50q
I tossed it on the slide for comparison but the real key for me was for it to fit behind the drivers seat …… this is the ultimate fridge spot IMO
I tossed it on the slide for comparison but the real key for me was for it to fit behind the drivers seat …… this is the ultimate fridge spot IMO
I’m not sure, I forgot to measure stock heights
Peacock
. Neighbors kids are mischievous
What size tires do you have? I can pull some measurements off mine if we have the same size. I have 286-65-18
275/70/18
Local customer dropped off his brand new heritage for us to put a set of 28565-18 Nitto Rifge Grapplers on.
After I took the pics Rob installed some spacers on front to level up a tad.
The customer removed the roof basket when he got it home from Indiana dealership.
it came with third row seats.
Hell of a machine.
After I took the pics Rob installed some spacers on front to level up a tad.
The customer removed the roof basket when he got it home from Indiana dealership.
it came with third row seats.
Hell of a machine.
I hunted for top speed on mine in West Texas today. 110 and I put the phone down. Was getting squirrelly. I got 118 before I backed off. Wondering if it’s electronically governed.
REKCUT
SILVER Star
Hold my beer and watch this....
