For Sale 200 Series Stoptech Front and Rear BIG Brakes 380mm

[bjowett]

Vehicle Model

1. 200 Series
2. Tundra
3. Sequoia

New Stoptech brake kits for all four wheels! Yellow calipers. Front calipers six piston, rear calipers four piston, all radial mount style. All rotors are 380mm. Retains stock e-brake. These fit vehicles with M12 caliper bolts. The radial mount caliper brackets could easily be re-tapped out to the M14 bolts for later models. These have the potential to squeeze under the 18” BBS Pro wheels by using a 1.25 - 1.5” spacer. Some of the rotors have very light surface rust from sitting unpackaged while in storage, very easy to clean up, will do before shipment, but want to up front about things. There are also a couple of chips in the caliper powder coating. These retailed around $6 - $7k… my loss $3900 OBO buyer pays shipping. More pics? Just ask.

 

[bjowett]

Stoptech vs stock.

 

[bjowett]

For the numbers guys, some (but not all) technical info is intermingled here https://www.appautomotive.com/wp-co..._Armored-Vehicle-Products-2019-9.21.32-AM.pdf

 

[BOGOTA]

Question would these brakes fit a 2002 100 Series with the 20" 200 Series wheels?

 

[bjowett]

No, they won’t fit the 100.

 

[S.CarolinaFZJ80]

So tempting for my '18 200. Will these fit stock 200 wheels without spacers?

 

[bjowett]

No, spacers will likely be required, and that’s if they have the large open bell like the BBS Pro wheel.