Heat the bushing barrel until the bushing starts to smoke. Then just pry them out with a screwdriver or pry bar
1st Land Cruiser
- Thread starter cyberfalco
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
Cool. I'll get a fresh bottle of propane for the little hand torch.
- Thread starter
- #123
Grease-able pins worth getting for the springs or just just get some stock replacements?
Stock
Yep, stock. The greasable pins break easier
- Thread starter
- #126
It's cold out and that bushing laughed at my propane torch so ended up cutting off the thread end of the pin and the outer plate. Then I pried it out of the hanger. Now I have to drill out the bushing and the center pin. Then I get to do three more [emoji1].
Bomar
SILVER Star
Dang thems look fairly new.
- Thread starter
- #129
I have some rear OME springs. How much would you want for just the front of you are willing to separate. If not how much for all 4.
- Thread starter
- #130
And I would need them shipped to Conway, Ar. You can put a UPS label right on the spring and they will ship them without a box.
Pm sent
