Wanted 1HZ/HD-T engine parts

[lynchmob]

Location

United States

Hey all , Im looking for the following items. Could be from either engine. Not sure what year any of this changed for HZ so early 90s is what Im working with.


Intake manifold
Plastic timing belt cover
Alloy plate on front of head that the cam passes through
Separator plate between engine and bellhousing. Manual type preferred
PS reservoir
Injector leakage pipe
Injector lines from pump to injectors
Oil dipstick tube (just the tube)
Throttle bellcrank (whole assembly the end of the throttle cable attaches to)

I do realize some/all of this is available new so I dont need that info - thanks
Thanks for any leads.

 

[rick_d]

I sent you a text. Should have most of that stuff. No intake manifold though.

 

[Akella]

I have some used and some new parts. PM if @rick_d doesn't have some parts you need.

 

[ZCissner]

I’ve got the intake manifold

 

[rudolf55nel]

Hi
Who can help me with regards to position of this nut from a 1hz. We redid the head and i replaced most of the gaskets and seal but have this nut left over

 

[orangefj45]

I have quite a few of these parts also including the intake.

Georg @ Valley Hybrids @ Cruiser Brothers

 

[70sguy]

I’ve got a valve cover if you still need one.

 

[rick_d]

-Plastic timing belt cover
-Alloy plate on front of head that the cam passes through
-Separator plate between engine and bellhousing. Manual type preferred
-Injector leakage pipe
-Throttle bellcrank (whole assembly the end of the throttle cable attaches to)

these parts shipped today to lynchmob