1HZ coolant outlet temp sensor Q's (1 Viewer)

[erics]

adding a turbo to 1HZ and plan a coolant temp sensor in this threaded hole in the water outlet housing (or drilled/tapped into the current plug that's there)... Is there an oem adapter that fits here on 1HDT? I can't seem to see anything on parts diagrams. Threads on plug appears to be M16x1.5 and I see lots of that size adapters out there to suit std 1/8 NPT sensors... but how does this seal? Is is tapered threads, or pressure fit at the bottom, or need a crush washer?

appreciate your help...

 

[erics]

anyone? think something like this would seal with its crush washer?

https://www.amazon.com/Pressure-Adapter-M16-1-5-NPT/dp/B0894LDF76/ref=sr_1_2?crid=3F7SVJJAGR7K3&dib=eyJ2IjoiMSJ9.xc4RnfBmzAMKfjdmjNoY7Lg6IY2_aXVEQk6aYbO5aH7kLD3K5KwS87qun1BBci7O_Q7tq8gG0lmtAQJxvGIyUy_M4zrM_2q82zLB8XC4YDQQEqsuaaGpM19tAdHHCD6xilNDpiQQqdmpGxWZGX80CtRtN90-rEB90ZLLtodTmbNpDnGg7UJcteFP2CSErdxYJNUe2jLcokfVpyVOw7qtRhh6_SuGPSeU0Ib-9DlC5OBrPnkmebUOXSE-I9Zr_xwrh3iD67SxIdSYIBorMDdjeviLNNLk7zCmxDRXMClhtRE.XWIxwEhDY83DeqOaP9q_wteDwd45Ihr4VPAsoPtvCME&dib_tag=se&keywords=m16x1.5+sender+adapter&qid=1710715133&s=automotive&sprefix=m16x1.5+sender+adapter%2Cautomotive%2C93&sr=1-2

 

[erics]

anyone? think something like this would seal properly with its crush washer?

https://www.amazon.com/Pressure-Adapter-M16-1-5-NPT/dp/B0894LDF76/ref=sr_1_2?crid=3F7SVJJAGR7K3&dib=eyJ2IjoiMSJ9.xc4RnfBmzAMKfjdmjNoY7Lg6IY2_aXVEQk6aYbO5aH7kLD3K5KwS87qun1BBci7O_Q7tq8gG0lmtAQJxvGIyUy_M4zrM_2q82zLB8XC4YDQQEqsuaaGpM19tAdHHCD6xilNDpiQQqdmpGxWZGX80CtRtN90-rEB90ZLLtodTmbNpDnGg7UJcteFP2CSErdxYJNUe2jLcokfVpyVOw7qtRhh6_SuGPSeU0Ib-9DlC5OBrPnkmebUOXSE-I9Zr_xwrh3iD67SxIdSYIBorMDdjeviLNNLk7zCmxDRXMClhtRE.XWIxwEhDY83DeqOaP9q_wteDwd45Ihr4VPAsoPtvCME&dib_tag=se&keywords=m16x1.5+sender+adapter&qid=1710715133&s=automotive&sprefix=m16x1.5+sender+adapter%2Cautomotive%2C93&sr=1-2