- Location
- United States
Used bellhousing from an H151 in good shape.
$200 obo
I also have a RHD shifter for one of these.
$30
$200 obo
I also have a RHD shifter for one of these.
$30
For Sale 1FZ H150/H151 Bellhousing and Shifter
- Thread starter lynchmob
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Bump
- Thread starter
- #4
I just did some comparison of bellhousings.
The 3B H55 bellhousing is about 1-3/8 longer. HZ is only about 1/4 longer. So in theory you could make a plate and use a B series H55 as long as the pilot bearing is in near the same location relative to the back of the engine. There are other issues to work out as well but Ill leave it to you .
The 3B H55 bellhousing is about 1-3/8 longer. HZ is only about 1/4 longer. So in theory you could make a plate and use a B series H55 as long as the pilot bearing is in near the same location relative to the back of the engine. There are other issues to work out as well but Ill leave it to you .