Hi All, Replaced the engine in our 3.1 4JG2 and all seems well apart from it cuts out if rev'd in neutral stationary or driving, bringing the rpm up to 3300k it rev's cleanly, no nosies, no smoke, but cuts out dead as soon as it hits 3300k rpm... Only code I could retrieve by linking the 16 pins in the terminal EOBC block was 24. Vehicle Speed Sensor. It drives perfect up to 3300rpm then shuts off, no splutter just cuts out.. All filters are new. Starts fine, just a puff of smoke that clears immediately. Pulls ok too, before it just stops dead. Starts up straight away. Help.. Thanks, db. |