Parting Out 1992 HDJ80

[joekatana]

I am parting out this 1992 HDJ80, engine and transmission are already gone so it is just the rolling body and frame.

CLEAR LENSES ARE GONE !

If someone is interested to buy it as is please let me know as this would save me a lot of time something I am always short of.

Frame has a bad rusted trough spot in the rear crosmember, rear axle is pretty crusty also but it is a ff so ideal for a cheap offroad project or so.

I am looking to sell off some parts that are not to time consuming to take off before I scrap it, it has a grey cloth interior but it is pretty rough also.

4 new 31 inch cooper tires on it.

 

[Outono]

PM'd

 

[PostMark]

If still up for parts, would you have an antenna and cable in good shape?
Also a gray front door speaker cover (appx 6 1/8").

 

[Yukon Kit]

I would like the belt molding on the driver and passenger front doors if they are in good shape and still painted black

 

[Ramo]

I am interested in the rear quarter (glass?) and associated gaskets/hardware shipped to 47933, looks to be a good way to fix my leaking windows.

 

[joekatana]

I am interested in the rear quarter (glass?) and associated gaskets/hardware shipped to 47933, looks to be a good way to fix my leaking windows.

I think these are cheap plastic ones but if memory serves me right I have a oem glass set somewhere at the shop. I would sell them for 100$ for the pair plus whatever shipping would cost.

 

[Ramo]

That sounds great, you have a PM.

 

[67azcruizr]

Hello Joe
Any of the wiring harness left?
If yes, what and pricing please.

-Sean

 

[joekatana]

Hello Joe
Any of the wiring harness left?
If yes, what and pricing please.

-Sean

Wiring harness is still there but cut at a few places so not worth spending the time pulling it out I think.

 

[67azcruizr]

Wiring harness is still there but cut at a few places so not worth spending the time pulling it out I think.

I’m only needing pieces of the harness, primarily around and including the engine bay FuseBox.
Mostly anything related to the Injection Pump side of the Engine.
Also the plug for the vacuum sensor on the AirCleaner.
Anything you have will be usefull and I would be more than willing to pay for your time.

 

[Yukon Kit]

I would like the belt molding on the driver and passenger front doors if they are in good shape and still painted black

Any word on this??

 

[joekatana]

View attachment 1782599


I’m only needing pieces of the harness, primarily around and including the engine bay FuseBox.
Mostly anything related to the Injection Pump side of the Engine.
Also the plug for the vacuum sensor on the AirCleaner.
Anything you have will be usefull and I would be more than willing to pay for your time.

I don’t think the early Euro soec had the vacuum sensor and all the other ones you mention went with the engine except for the fusebox that one might still be in there.

 

[joekatana]

Any word on this??

What do you mean with belt molding ?

 

[Yukon Kit]

 

[67azcruizr]

I don’t think the early Euro soec had the vacuum sensor and all the other ones you mention went with the engine except for the fusebox that one might still be in there.

I would like to buy the fuse box then

 

[joekatana]

View attachment 1782676

Lol they all brake off after 25 years of use , not trying to remove those but pretty sure they are still available new.

 

[joekatana]

I would like to buy the fuse box then

pm me a phone number so I can text you some pics from under the hood later this week.

 

[toadshade]

Just messaged you on the rear tailgate blinkers on another truck. Let me know if they are still available on this one.

 

[joekatana]

Just messaged you on the rear tailgate blinkers on another truck. Let me know if they are still available on this one.

Probably got me mixed up with someone I didn’t get a message from you

 

[SHREDwagon]

Is the windshield washer reservoir, including pumps available?