1986 FJ60 Parts for sale / some are OEM new

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 20, 2006
Threads
244
Messages
9,502
Location
AL, USA
Parts for sale: (From or for a1986 FJ60 Land Cruiser with A/C). Some parts are new OEM and will be listed; as such some are new from SOR. All parts listed as new are exactly that, new, and have never been installed or used. All other parts are used items that I have removed from my truck in the process of completing a V-8 engine swap. You should request pictures via email to elbertclarke@bellsouth.net. All parts will be shipped by ground UPS from 35055, unless arrangements made otherwise. I will offer to deliver the engine & trans for a reasonable fee in the state of Alabama, otherwise any shipping and or required fabricating of a shipping crate will be at buyer’s expense. LC has about 177,000 miles on it. I’m the 3rd owner of the vehicle. If shipping is required for the engine assembly, arrangements will have to be made using truck freight or other means, same for transmission. All prices below do not reflect shipping charges! I will source boxes free where I can, where I’m unable to do so, that will be part of the shipping price. All parts sold “as is,” all items that are used I have removed from the vehicle personally and they were fully functional upon removal. All prices are in US funds. I can accept paypal. Pictures for all items can be furnished by email upon request. I would rather email pictures if possible to cut down on postings but if required I could post as well. Truck has factory A/C. I will edit the initial post to reflect items sold. I will answer any questions in the for sale forum such that all can see. If you are serious about buying a part you should post to this forum, such that I can keep track of who has first shot at whatever part and so that others can see who is first in line .


Used Parts:
Radiator Fan Shroud (good shape $15.00)
Charcoal canister (plastic valve on top damaged $25)
Hard lines off firewall ($5 each, $5 each)
Carburetor cooling fan (good shape $30)
4 speed manual transmission with shifter. (Can be part of engine deal, grinds a little when going into 3rd gear ($50)
Exhaust pipe with emission plumbing attached. (Good shape $20)
Hard line heater hose / pipe that attaches to the firewall. ($10.00)
Factory P/S cooler hard line with hoses (good shape $25.00)

I-6, 2F, partial de-smog, complete engine assembly (includes distributor & electronics, coil, full accessories, P/S pump, A/C compressor, radiator fan, alternator, fuel pump, starter, belts, full emission controls (one plastic valve is broken and engine does leak from rear main), also comes with bell housing, clutch and flywheel, carburetor, air filter housing…. everything that is considered part of the engine assembly is included. Does not include clutch fork or clutch fork pivot ball. Smog pump removed and Jim C idler pulley installed. Also air rail has been removed and holes plugged on the cylinder head. Power steering pump is a new Toyota OEM about 1.5 yr old. I’m willing to make a deal that combines the engine assembly referenced above + smog pump + 4 speed+ exhaust pipe with EGR hose. No parting out of the engine assembly at this initial offering, may consider later if no one is looking for a complete engine. (Good running condition, complete assembly ($700). Will include misc minor spars parts with this. Engine is fully assembled; we only disconnected and removed hoses that were required for engine swap. Full detailed pictures upon request. Home brewed engine stand included. I will provide any numbers off the engine if anyone needs a reference and you let me know where to look.

New Parts from SOR (Specter Off-Road)
054-14KB Fan belt Kit (uses OEM toyota Fans belts) ($41.70)

** To avoid confusion.... interst in parts should be posted to the forum. I want to be fair to all interested parties. So it the best way to do that is to manage this on the forum so everyone can see who is first. I will offer parts to the first person in sequential order that posts their intent. Details in regard to shipping etc can be worked offline. I hope this is fair to all... sorry if anyone gets caught in the mix, my fault on that. **

** "GUYS".... please use your real name in the body of your post or identify your user name in the emails you send. As you might guess I have generally no clue as to your real name, at least for the most part. **
 
Last edited:
I'll take the water pump, fuel pump & p/s pressure hose. Do you take paypal?
 
Ih8wood,

Yes I have a paypal account and its aligned with my email address elbertclarke@bellsouth.net. I would have to be honest and say I've not used it for receipt of payments so far, I've only used it to pay out on stuff I've purchased. As I understand it, yes I can received payments via paypal. You can be the "first one"...

Email me your address info so I can figure out what shipping will be. I use a UPS store near where I live for shipping due to the "ease of use".

Elbert
 
Ih8wood,

Yes I have a paypal account and its aligned with my email address elbertclarke@bellsouth.net. I would have to be honest and say I've not used it for receipt of payments so far, I've only used it to pay out on stuff I've purchased. As I understand it, yes I can received payments via paypal. You can be the "first one"...

Email me your address info so I can figure out what shipping will be. I use a UPS store near where I live for shipping due to the "ease of use".

Elbert

email sent.
 
Im interested in these hoses
"I have most if not all of the molded heater hoses for the I-6 also. I will add them as soon as I’m able to verify what I have"
these hoses
"Radiator hose kit. 054-02K-Kit (2 EA $25)"
and the thermostat.

Thanks
 
Guys....interested parties ** Please take note **

Post your intent to buy in this forum, so that I can keep track of "who is first in line". You can email me
all day long with questions and whatever, but I"m going to manage the "order of sale" by the postings to this forum, so that all interested parties can get a fair shake, and so that everyone can see who said what. I will also post a sold notice by items that sale (only after I've received payment).

Whomever says they want to buy whatever item first.....they get first shot at it. Those after that will get a chance at the item if it does not sell to the first buyer, based upon the date and time their message gets posted to this forum.

Please keep this in mind...
 
Guys....interested parties ** Please take note **

Post your intent to buy in this forum, so that I can keep track of "who is first in line". You can email me
all day long with questions and whatever, but I"m going to manage the "order of sale" by the postings to this forum, so that all interested parties can get a fair shake, and so that everyone can see who said what. I will also post a sold notice by items that sale (only after I've received payment).

Whomever says they want to buy whatever item first.....they get first shot at it. Those after that will get a chance at the item if it does not sell to the first buyer, based upon the date and time their message gets posted to this forum.

Please keep this in mind...

As you might guess my real name is Elbert.... :)
 
Im interested in these hoses
"I have most if not all of the molded heater hoses for the I-6 also. I will add them as soon as I’m able to verify what I have"
these hoses
"Radiator hose kit. 054-02K-Kit (2 EA $25)"
and the thermostat.

Thanks

msg received
 
I want whatever new radiator and heater hoses Lynchmob doesn't want.

Thanks!
Steve
 
Interested in heater hose pipe 054-08D from SOR and Hot Air hose to Air Cleaner AND the A/C Idler Pulley and FAN Clutch (it's the red one, right?) and P/S pressure if it doesn't get sold.

Thanks!
 
Last edited:
Elbert
If the smog pump is OEM Toyota.
I'll take it.
Thanks
James

James,

the truck had that smog pump on it when I bought it. I'll look to see if I can find any markings on it. I can't tell you 100% if the smog pump is OEM or not. I really don't know. I removed it some time ago when I did a partial desmog. It was working fine when I removed it and I've just had it in my storage buidling since then.

Let me see what I can find on it. I don't want to tell you its an OEM part because I just don't know.

Elbert
 
Interested in heater hose pipe 054-08D from SOR and Hot Air hose to Air Cleaner AND the A/C Idler Pulley and FAN Clutch (it's the red one, right?) and P/S pressure if it doesn't get sold.

Thanks!

Fan clutch is the red hub version.
 
Interested in heater hose pipe 054-08D from SOR and Hot Air hose to Air Cleaner AND the A/C Idler Pulley and FAN Clutch (it's the red one, right?) and P/S pressure if it doesn't get sold.

Thanks!

Pics of items sent your way via email / PS hose sold.
 
Im interested in these hoses
"I have most if not all of the molded heater hoses for the I-6 also. I will add them as soon as I’m able to verify what I have"
these hoses
"Radiator hose kit. 054-02K-Kit (2 EA $25)"
and the thermostat.

Thanks

Are you looking at both radiator hose kits? One of the other guys has interest.... I had revised the price because I screwed up. As you can see in the initial post, the kits are $25 EACH and I have two of them, so its $25 per radiator hose kit.

I should know on the heater hoses this weekend. I had to use of the molded hoses I had for the heater valve on my V-8 swap. I'll list what I have on the various heater hoses by this weekend. Some of the hoses are just straight sections, and some are molded.
 
Elbert
If the smog pump is OEM Toyota.
I'll take it.
Thanks
James

James,

I grabbed the smog pump from the storage building. It looks OEM to me. It has a label on it that says DENSO and 17610-61030 and made in Japan.

While I have no direct knowledge its OEM it sure looks that way to me. I'm the third owner of this truck. Email and I'll send you a couple of pictures if you want.

Elbert
 

Users who are viewing this thread

Back
Top Bottom