1974 FJ40 parting out in Bay Area, CA

[Flatty]

Location

United States

It is all there except the top and the axles. Here is teh story on this cruiser:
I bought this in order to restore it into a crawler so I did not care about the body to much. But as I started tearing it apart I noticed the frame was a bit too rusty for me,a nd the body was BEAT. So I decided that I would simply keep the title and part the rest out. I will be building another cruiser as soon as this one is all gone, but this time I will pick one that I can get in and drive to work and back without too much sweat. So here is what I have:
1974 FJ40 The actual body is rusted, BUT the fenders are good, as are the fender skirts, and the front bib/grill/bezel. All the lighting is on there, and good to go. The dash is complete except for the dash pad (gone). stock cage will be sold today. 4 speed tranny and t-case. Motor runs and runs pretty well. It has a header. I will be chopping the body up into small sections and selling it for scrap with the frame. I have all the stock glass for the top, but the top is toast. The only past worth a damn is the rear lift hatch. If you need something, let me know and make me an offer.

Located in Belmont, CA 94002

Dima

 

[Ghetto Fireman]

Air cleaner assembly, intake manifold and carb???


PM Sent!!!

 

[Flatty]

Air cleaner assembly, intake manifold and carb???

I don't think it has an air cleaner, but it does have the intake and carb. Let me know if you want those (I am goignt o try and sell the whole motor for $100 first).

Dima

 

[weak-link]

Interested in the engine+trans+tcase+driveshafts

Plus the complete dash

Pm me your number

Thanks, Jason

 

[65swb45]

Put me in line for the engine. I'm looking for a core.

Interested in the hatch too. Windshield frame? Istrument cluster? Brake booster core? Fan shroud? Seats and seat brackets?

818-953-9230.

 

[Bang Bang]

PM sent.

 

[B6i6K6e6R6b6O6y]

how about the heater duct, the one from the blower motor to the heater?

 

[jgray]

How much for the lift hatch struts / shocks / stays whatever you want to call them?

 

[Silicon 70]

I'm looking for all the lights except for the headlights and brake lights. So that means both turn signals, all four side marker lights and even the reverse light. If this has the transfer case floor shift kit I'd like that as well. I'm still using the old column mounted vacuum shifter.

Please let me know.

Sent PM as well.

 

[DieselCruiser81]

Fenders

Can you send me a picture of your fenders? How much would the shipping be to 77580? Thanks

 

[mattcamp]

I need the metal rails above the doors that attach to the fiberglass top, with shipping to 97006? just the driver and passenger doors not the rear.

 

[Flatty]

Guys, sorry for not checking back more often. I have someone that may be interested in the whole cruiser, so that will save me a TON of headache of scouring parts off of it. Let me find out if it will go as a complete unit. If not, then I will start piecing it out.

Thanks
Dima

 

[65swb45]

Guys, sorry for not checking back more often. I have someone that may be interested in the whole cruiser, so that will save me a TON of headache of scouring parts off of it. Let me find out if it will go as a complete unit. If not, then I will start piecing it out.

Thanks
Dima

Totally agree. Good luck with that. It's just a spare motor for me for when I build one for my 40, so I'm sure another will turn up.

Best

Mark A.

 

[ryanthegreat]

copper firewall tubes? i neeeeed them badly!