100series OEM Steering Wheel

[75Denver]

Looking for first hand experience and advice here:

My 2004 LC steering wheel is starting to wear at the seems and it’s bugging me. Is anyone on here familiar with the OEM factory part numbers? Is there another model leather wheel I could pull and swap the internal (cruise/audio/etc) pieces from my old onto the new that would mate up to the LC100 steering column?

By what I see, the 06-09 4Runner and Tacoma leather wheels look identical. Not sure about the internal mounting points though. Thx!

 

[excessive]

Short answer- no, there are no other models that are just swap in. The 4runner wheels look very similar , but not an exact fit. The only real option is to have your wheel reconditioned $$$ or buy a new OEM one $$$$, or a cheap aftermarket one $

 

[willyroo]

Is there another model leather wheel I could pull and swap the internal (cruise/audio/etc) pieces from my old onto the new that would mate up to the LC100 steering column?

Before LCool (Australian LC site) died, someone had posted about successfully transplanting an Aurion XV50 / Camry XV40 steering wheel into an LC - even the clock spring worked.

Another option from a fellow mudder:

PSA: Steering Wheel Upgrade for 100 Series

I recently purchased and installed an aftermarket steering wheel from Ebay on my 100. Had wheels from this seller on a couple of my old 4th gen 4runners, which is effectively the same steering wheel, so knew I liked the fit/finish and build quality. Those were black however, so much easier to...

forum.ih8mud.com

 

[willyroo]

Before LCool (Australian LC site) died, someone had posted about successfully transplanting an Aurion XV50 / Camry XV40 steering wheel into an LC - even the clock spring worked

Camry steering wheel in an LC100

105 steering wheel upgrade

Hey guys I have a standard 105 series has no air bags or clock spring I’m thinking of upgrading my steering wheel to the 300 series style one but need a boss adapter does anyone know if the size of the boss on the 105 is the same as the 80 one because no one makes the kit for a 105 cheers

forum.ih8mud.com