ARCHIVE 100 Series Rear Hatch Adjustable Accessory Mount

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

reznunt

Massive Metal Shop
Supporting Vendor
Joined
Nov 14, 2011
Threads
82
Messages
1,789
Location
SoCal
Website
massivemetalshop.com
mounts-1.jpg

kp10004-2-180x180.jpg
kp10004-180x180.jpg
kp10004-4-180x180.jpg
kp10004-3-180x180.jpg
kp10003-2-180x180.jpg
kp10001_kp10002-180x180.jpg


Hey guys, if anyone is looking for a mount for their antenna or other accessory, we just started carrying the KP adjustable mount. I have it on my truck and it fits and works great. The top mounting hole is slotted so I can adjust the lean forward/backward which is a nice feature. They come bare metal or powder coated but our current order only contained the powder coated version. BOTH PASSENGER AND DRIVER SIDES IN STOCK AND SHIPPING NOW!!! All pre-orders have been shipped.

Kali Precision 100 Series Land Cruiser LX470 Adjustable Accessory Mount

From the manufacturer:

KP offers the best way to mount your antenna/accessory to your 100-series! Our adjustable low-profile rear mounts are 100% bolt-on and they install in minutes. They’re fully designed and manufactured right here in the USA by American engineers and fabricators.

  • Fits both 1998-2007 Toyota Land Cruiser / Lexus LX470 models
  • Installs behind the rear hatch rubber stop
  • Does not interfere with hatch operation
  • 1/2″ hole for CB antennas, lighting, flags, whips, and more
  • 100% bolt-on, no drilling required
  • Large base plate accommodates HAM antennas
  • Can be drilled out to 3/4″ for NMO mount antennas
  • Strong, boxed design with adjustable cant forward and aft
  • Integrated bottle opener
  • Made of 12-gauge HR steel
  • CAD drawn, CNC laser cut, precision formed, TIG welded
  • Available in bare or powder coated finish
  • Powder coated mounts are sand blasted for proper powder adhesion
  • Made in USA
 
Last edited:
Thanks for the preorders everyone! We should have these shipped within the week!
 
They finally arrived! Preorders will ship over the weekend. Thanks everyone!
 
Has anyone used these mounts for reverse lights? Would a small square Rigid light work here? Thanks
 
Has anyone used these mounts for reverse lights? Would a small square Rigid light work here? Thanks

I asked KP the same thing... they said that a small single 10W light would work there depending on the dimensions. They said one of the criteria of the mount design was to keep it as "low profile" as possible.

I see what they're saying though... in order to fit a 4" square pod-style light at that location, there would have to be a big old honking bracket hanging off the side of the truck for the light to clear the hatch. With lights installed it would look kinda funny, far from clean IMO. Many of us with rear bumpers and roof racks have much better and more useful places to install camp/utility/reverse lights.
 

Users who are viewing this thread

Back
Top Bottom