100 series rear diff in a fj40???
- Thread starter vsh150
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
4.88 might be your only option... Call Karl @ justdifferentials and he will be able to help you...
9.5 Landcruiser 98+, 07+ Tundra : JTs Parts & Accessories, Justdifferentials.com
9.5 Landcruiser 98+, 07+ Tundra : JTs Parts & Accessories, Justdifferentials.com
Gears
4.88 would be your only aftermarket option TLC100-488-NG
that way you could easily match the front.
We do sometimes have good used 4.10 or 4.30 OE gears. In fact I have a 4.10, that way you could just regear your 100 series diff to match.
Also the 100 series locker unit is 32 spline, so this is not possible with semi float rear, and if going in a full float rear or front you will need custom axles.
The plus side is that you can put your stock 30 spline side gears into the locker unit and run with 30 spline front or full float rear, again not possible if you are trying to do it in a semi float rear
Send me an email or call and we can come up with a solution for you.
4.88 would be your only aftermarket option TLC100-488-NG
that way you could easily match the front.
We do sometimes have good used 4.10 or 4.30 OE gears. In fact I have a 4.10, that way you could just regear your 100 series diff to match.
Also the 100 series locker unit is 32 spline, so this is not possible with semi float rear, and if going in a full float rear or front you will need custom axles.
The plus side is that you can put your stock 30 spline side gears into the locker unit and run with 30 spline front or full float rear, again not possible if you are trying to do it in a semi float rear
Send me an email or call and we can come up with a solution for you.
unless you plan some serious mods as minis SF axles that don't use c clips ..