100 series cup holder divider and plastic cover for shifter.

[austinman]

looking for the cup divider

for a series 100. also the plastic piece that goes around the shifter.

 

[jLB]

The "butterfly" for the cup holder in p/n 55633-60050 (search for it on google and you will find multiple sources).

"The plastic piece that goes around the shifter" that could be interpreted and as number of different things.

 

[austinman]

looking for the cup dividerView attachment 2304872 for a series 100.

looking for the cup dividerView attachment 2304872 for a series 100. also the plastic piece that goes around the shifter.
[/QUOTE



well it is the part that is showing in the photo that whole plastic inset

 

[jLB]

This ? (p/n 35921-60180)

This ? (p/n 58843-60010)

This? (p/n 58804-60151)

Or the other plastic thing?

 

[austinman]

looking for the cup dividerView attachment 2304872 for a series 100. also the plastic piece that goes around the shifter.

This ? (p/n 35921-60180)
View attachment 2304898

This ? (p/n 58843-60010)
View attachment 2304902

This? (p/n 58804-60151)
View attachment 2304912

Or the other plastic thing?

View attachment 2304913

it is the tan plastic cover that goes over the black part of what you show just above here. my pic shows a piece of it broken. frankly I like the all black as you show here.

 

[gregnash]

The "butterfly" for the cup holder in p/n 55633-60050 (search for it on google and you will find multiple sources).

"The plastic piece that goes around the shifter" that could be interpreted and as number of different things.

Note that the "butterfly" is different for 98-00 models (i believe). My 98 has just a stationary piece that fits there.

 

[jLB]

it is the tan plastic cover that goes over the black part of what you show just above here. my pic shows a piece of it broken. frankly I like the all black as you show here.

The p/n 58804-60151, that I listed is the early LX470 trim piece:

The picture you show looks more like the Land Cruiser panel, (that is usually solid black plastic with no "wood") with an aftermarket (port/dealer added) wood kit.

 

[austinman]

The p/n 58804-60151, that I listed is the early LX470 trim piece:

View attachment 2304920

The picture you show looks more like the Land Cruiser panel, (that is usually solid black plastic with no "wood") with an aftermarket (port/dealer added) wood kit.

yes correct 2001 land cruiser. i am going to try to peel up the rest of the plastic. the part that goes up to the ashtray is all good, figures they would have added it at the dealer.

 

[DirtDawg]

You talking about the fake wood grain? Kits can be bought, but IMO just remove it.

 

[austinman]

You talking about the fake wood grain? Kits can be bought, but IMO just remove it.

yes, and I agree just going to remove it. the black looks best anyway.

 

[Trunk Monkey]

Been discussed here many time, but here goes again - close up truck, run heat on high for like 20 min on a really hot day. All that will peel off and leave no residue.

 

[austinman]

yes, and I agree just going to remove it. the black looks best anyway.

thanks for the good advice on removal, was going to try acetone but worried about damage to the base

 

[Justin Alderson]

Note that the "butterfly" is different for 98-00 models (i believe). My 98 has just a stationary piece that fits there.

I was trying to look up a replacement for this drink divider/butterfly item. My 1999 TLC has the adjustable version, although I did buy the rig used, so the used car dealer may have replaced the factory default item. My local Toyota dealership said the 1999 only shows the full drink holder assembly (pn: 55604-60062) and doesn’t offer just the butterfly divider.

Thought I’d throw this out to save a little time for someone down the road.