Our ‘03 drive-by-wire notchy feeling gas pedal. I’ll let my video do the talking. Hope this helps somebody.
—Mark
—Mark
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Well I say this all to say there is a workaround to the problem. The new pedal is north of $400, as I recall, and this is a free solution, albeit imperfect .I've been driving mine in this config for a couple of years now.Okay.
Cheaper than I paid so that's a nice deal you got. Mine was the same plastic piece, I've kept my old pedal in case someone eventually comes up with a fix. Unfortunately that little white slide isn't removable or replaceable.$254.95. I avoid workarounds if possible but they are certainly necessary at times. If north of $400, prob would have tried a fix first. Had to do some searching but found a great deal on mine. If anybody needs one, PM me. Couple left I think.
Can you remove this bolt with the pedal still installed?removing the bolt definitely lightens the pedal when driving but after one drive, I barely notice it any more. it's worth the 10 minutes it takes to do this to see if you like it or not.
Good to know, thanks.I'm not sure if there's enough room to do that. if u feel around the area right above where the pivot point is on the passenger side, you should be able to feel the bolt (it's an 8mm). if not, it's just 2 bolts that remove the entire pedal assembly (don't forget to unclip the sensor).