ridge grappler

I'm posting this for those considering NITTO Ridge Grappler tires (LT285x65x18E). Tire tread depth @new: 16.5/32" After 25,000 installed miles: 11/32" ( all around) Tire pressure:42psi Rotated every 5,000 miles

Selling my wheels and Tires stock TE wheels, same as FJ cruiser. Nitto Ridge grappler tires with maybe 1000 miles on them. did 3 light wheeling trips in Anza Borrego, Superstition Mtn before upgrading to BFG MT's. No patches rock rash or chunks missing. super quiet on the freeway. took off...

4 OEM Wheels + Nitto Ridge Grappler 275/70/18 + TPMS sensors + Center Caps Approx 20K on the Tires but plenty of life left! $600

I'm selling four Nitto Ridge Grapplers 265/70R17 with only 8742 miles on them (I changed to a larger size when I upgraded my suspension). About 5/16" of tread still, no uneven wear or blemishes. $400 for the set!

I recently purchased a new 2019 LC. On the drive home from the dealer, I noticed a moderate pull to the right even though the vehicle only had 10 miles on the odometer (didn't catch on the test drive). I wasn't too worried since I was planning to add a BP-51 lift and would need an alignment...

For anyone who is interested, I just switched out the oem Michelin ltx m/s 275/70/16 with Nitto Ridge Grappler LT285/75/16 on my stock suspension 1995 Land Cruiser. There is no issue with clearance at all (as many other posts have stated in the past). See before and after pictures below. Ride...

New Shoes 1 by matthew a posted Apr 18, 2017 at 7:08 PMNew shoes 2 by matthew a posted Apr 18, 2017 at 7:08 PMNew shoes 3 by matthew a posted Apr 18, 2017 at 7:08 PMJust installed today glad to say this size fits on stock cruiser with no lift and no rubbing. Tires are nice, smooth, and quiet...

I'm about to pull the trigger on one of these. I've done a ton of browsing and such but I can't find much info on the Ridge Grapplers ( $293 each ). The STT Pro are well reviewed and rated and cheaper ( $253 each ). BUT! The STT Pro seem to lack a bit of aggressive side wall design. It's a bit...