replacement

I bought a 1998 Anthracite Ltd a few years ago and it came with a cracked lens on the instrument panel. Drives me nuts just to look at it especially with the super fine dust that filters in through the crack. Anyway, I picked up a dash lens from a 1999 and was surprised it just has a few easy...

I own since new a 2009 LC200 fitted with AHC. I never (touch wood) had any issues with it, but I was wondering if it made sense to plan a replacement of the hydraulic fluid. I know Toyota declares it good for the lifetime of the vehicle, but much in the same way they do for the gearbx oil, I...

First off not my first replacement of a ball joint. Dad’s 05 4runner said he had some play in the front end. Truck has 400k I do all the work on it. I have replaced the ball joints a few times upper and lowers. He brings it over with some upper BJ’s I order him awhile back. I determined the...

Can I use a brake booster from any year besides a 98-99? Hi everyone. I have a 98 cruiser with 282k miles. I replaced my assembly with a used one from Ebay only to have it suck too. It squeals from the booster at start up and the buzzer stays on in the cabin for a bit. My ABS and brake light...

Hey guys - My right side battery took a dump and I'm looking to replace both. Issue is, I'm having trouble finding a "good" replacement for the right side, given that the terminals are oriented opposite of most group 27 batteries. I'd like to have the same unit on both sides with the same specs...

85913-90A01 is the Heater HVAC Blower relay for 81-10/85 FJ60. NLA and no substitute or aftermarket that I can find. The later one (> 10/85) is substantially different. Anyone found something that will work ? Cheers.

Im curious if my 2017 LX570 uses the same accumulator part numbers as the earlier 2008-14 trucks in this thread https://forum.ih8mud.com/threads/lx570-ahc-globe-accumulator-replacement.1193703/

Getting a wicked grind or grind sounding rattle after I release the key when starting our 2001. First thought was starter when my wife told me about it, but it doesn’t happen until the key is released - not when turned to start and not when vehicle fires up but before releasing the key. Where...

Hey all, I've seen posts about alternator replacement for my 91 Landcruiser but nothing in-depth. Before suggesting that it might be something else, I've already tested it, and it's definitely the alternator. So my questions are: 1. Are there any good YouTube videos/step-by-step articles, etc...

Replaced my stock hood springs and hood prop with new gas shocks. Makes the engine bay a lot cleaner and easier to work on. Shocks were $18 on Amazon. Utilized the stock hood spring holes and dabbed the brackets from angle iron from Tractor Supply. On the drivers side there was not a hole in the...

This may be the wrong area to post this but does anyone know a Good place to get replacement sr5 body graphics I have a 1984 xtracab sr5 pickup I dont know if that changes the Graphics at all

Bushings on my 08 GX470 (178K) are dry and cracking. Looking into options to replace the bushings or the entire lower control arm and just start fresh. Trying not to break the bank on the replacement. Any suggestions for brands to look at and/or tips for the replacement?

I have a torn steering rack boot on my 06 LX can I change it without unscrewing the tire rod end?

Hello, The trim piece towards the front of my rear window is cracked in two places. It's cracked in the same places on both sides of the vehicle. Are those replaceable? If so , does anyone know what they are called and maybe the part number? Thanks

The driver-side heated seat stopped working in my 2000 LC w/ 225k miles. The switch works. The connectors are good. I am sure it is the element inside the seat. So I want to know what is a good alternative to replace the OEM seats with? I looked into scheel-mann, but it doesn't have heated...

Hi all. Getting ready to replace my rear coils as the stock ones have 213k miles on them and they’re tired. I’m thinking about the dobinsons c59-223v. They’re progressive and only give ~1.5” of lift which is fine. I have no extra weight (bumpers, etc) and don’t plan on adding any. I wasn’t...

So I was one of the lucky ones that the cigg lighter/aux port door won't shut. I tried to tear it down and fix it but I ending up damaging it even more 🤣🤣. I found the the part and the part number for anyone looking for a replacement.

This is what I'm working with. I know I can cut out and repair what has been eaten through. Does anyone know who might sell new wheel wells or a new tub before I begin fixing what is there?

Any tips for replacing the rear sill and floor on a '78 FJ40? I am shopping for a replacement and wonder about the quality of replacement parts out there. Thanks, Ken RN

Anyone cerakote a FJ62 grill? Anyone have a good FJ62 grill and headlight surrounds for sale? I am not wanting to paint it, but thinking maybe a grey cerakote might look good against the red cruiser? Any thoughts? total long shot, anyone have a set of snake blinders they want to sell :) Thanks