removal

Hi I was hoping someone could help me figure out how to remove/disable the factory alarm for my 2002 LC 100 series. Seen some posts on this in the forum but nothing for my era of LC and nothing that was very detailed or helpful. Feel free to DM me if you don't want this sort of conversation...

So I managed to break off (completely) the socket that holds the clearance light bulb on the passenger side headlight assembly trying to replace that small bulb. I now need to remove the entire assembly to pull out the damaged socket. I removed all the clips/bolts on the top side and on the...

After reading through various threads I finally bypassed and removed the rear heater using the simplest procedure I could think of. Hopefully this thread can help someone else out that has been reading multiple threads on the topic. Please note that I did not drain or flush my system at this...

Trying to get the instrument panel out, need to replace some lights and fix a broken odometer(stopped working a few days ago when I pressed the trip reset) in a '93. I've watched some videos and searched around on this forum but I the resources I found had me stuck at the removal of the second...

After reading all the threads, I decided to tackle my roof rack removal today as I'm buying a Baja Expedition rack shortly and just purchased a Tepui RTT. Thought I'd share my experience and offer some tips for others who are thinking of doing it. My biggest tip: If you've been putting this...

'83 FJ60 Clutch Slave Cylinder by pokerDawg posted Apr 15, 2017 at 4:28 PM I can't take the hose off the clutch slave cylinder. I'm using a 17mm open box wrench. I've sprayed it with stuff to loosen bolts. I've tried removing the hose while the cylinder was mounted and unmounted. I've searched...

So, I'm in the process of removing the rear seat video screens in my new LC. The cover came off easy. A 10mm socket made quick work of the three nuts holding the screen onto the back of the seat. Two of the connections came off easily, but I'm having trouble with the green connector. Any...

I removed one of my locking hubs - just the outermost part containing the rotating gold switch and the black ring - and forgot to note the position it was in before removal. How important is this? In putting it back, it seems that it can only go back in one of two orientations. The inner teeth...

i know this is extremely basic but i dont want to mess up anything. how do i remove my shifter. non of my manuals show me how this is done.

I just wanted to know that to remove the rear third member do I just need to slide out both rear axles then just lift it out or are there other steps in the process. There are no lockers installed currently.

How do I remove the trim pieces at the front upper seat belt adjuster to get to the seat belt anchor please? I don't want to ruin the plastic... It is an 96 with the adjustable belts... Thank you! Jan

ok I have all the endcaps removed and screws out but I cant figure out how to remove whatever is holding down the middle posts?

Does any one know how to take the center console apart, when it has a OEM buildin fridge?

I know it's been covered and the dead horse is thoroughly tenderized, but I'm seeing a lot of questions asked and thought since I recently messaged someone some details that I'd make the information easy to find. Roof rack removal looks cleanest welded. However if you don't have the time...

Is there a go to thread or step by step for rear spoiler removal? I cracked mine after opening the hatch in a low garage so I need to remove it.

I don't know if many have used paintless dent removal, but those guys are magicians. I hate dents, so it I get door dings, I call up my guy. I plan on painting my 60 at some point in the next year, and I had the guy work some magic today. Here are some before and after pics. No bondo needed...

That's it. I called the dealer and they don't sell them. Where can I get a tool to remove the pins from the Toyota connectors without damaging the connectors?

For those of you whom have removed your stock TRD supercharger pulley, did you need to use a puller to get the pulley off of the blower snout? I zipped the nut off but could not get the pulley to remove. I checked the pulley boys website and the pullers it has mentions that they are not needed...

I'm starting this thread for those HDJ81 Land Cruiser owners that are thinking of having their 1HD-T diesel fuel injectors tested/reconditioned/replaced but want to remove the diesel injectors themselves in order to save some money and learn more about their Land Cruiser (like me)! I have...

I am dealing with the ubiquitous leaking evaporator enclosure issue. Last night, I removed the glove box to rule out the heater core as the source of liquid on my floor mat and confirm it was the evaporator enclosure. When reinstalling my glove box, I was unable to get it to fit correctly. The...