gasket

I did a search on the Forum and did not find anything. Does anyone have good instructions for this?

275,000 miles and 20 years. Started leaking externally at the back of the PS head as well as just above the engine mounts on both heads. Truck ran fine and an inspection of the cylinder bores didn't give me any reason to believe it was leaking internally but I'm sure it was only a matter of...

not affiliated in any means but figured I'd put it up for anyone looking in the future. I purchased this set off eBay (PartsPuzzle) from the Netherlands. I'll go through the set as I applied them. Here is the blower gasket along the firewall. first compared to the original and then on the unit...

Hi all, Removed my Remflex gasket to try to reseal it (was leaking). But am trying to figure out how I can get the old stuff off without spilling into the ports. Ideas? I have some fine steel wool. And was just gunna jam paper towels on there then pull em out after.. Dan

No longer needed on my project Unopened, OEM 66-74 I believe... $100 shipped for both pieces as a package, will not split up. Thank you

Reproduction plastic mirror gaskets for the FJ55, model years 1968-1980. One left gasket and one right gasket. Sold as a pair. Purchase link: FJ55 MIRROR GASKET Right & Left - https://slocruisers.com/shop/ols/products/fj55-mirror-gasket-right--left Price: $34.50 USDs plus shipping. This...

Question for forum members - I replaced the spark plugs the other day, found oil in the tube and on the plugs on the driver side valve cover. 199k miles on the clock. Is this a pretty straight forward diy? Is it easier than the valley plate leak? I did the valley plate leak 2 years ago with the...

So my head gasket blew. I took it to Land Cruiser Northwest to get it looked at because I had a P0306 code and the injector came unplugged. But I had an exhaust leak so I was going to have them fix it. They took a look over it and did some tests and told me the head gasket was blown. They quoted...

Hey guys, the clutch was on its last leg and I decided it was time to change it out. The oil pan gasket was leaking and figured we might as well replace the gasket. This was sitting in the oil pan, any ideas what this is???

A few weeks back I took the front door woofers out and replaced them with some hertz dieci (crutchfield's recommendation) speakers. I don't like the sound and I'm pretty sure I'll send them back. Getting an amp in and all that seems like a ton of work, especially since dealing with the oem radio...

Had to be done

I just picked up my first FJ60 a few weeks ago. I am an inexperienced mechanic by all accounts so am using this as a steep learning curve to build some basic knowledge. I have read much of the FAQ and plan to utilize that for some basic gasket replacement and fluid changes. In the initial...

I’m in the process of replacing the glasses on my oil plan. There is a post from @Poser that I have been using as a guide. He uses a carquest supreme black gasketing silicone sealant for the corners and on the saddle of the gasket. I couldn’t find anything similar at the auto parts store so I...

Attempting to check my water temp sensor led me to do a check of my thermostat. HOWEVER Some previous owner must have opened the thermostat casing before and then used a sticky silicone (loctite?) to form a gasket sealing it together with the water pump. The sucker won’t budge. Any tips...

I found leak behind crank pulley by oil pan just in front of it.There bolts there tight is there a gasket a drip drip drip anyone seen this before low milage cruiser to 60,000 miles.Im lost and really do not want to take off as I old and on oxygen full time. I wonder how many hours to change...

We moved the gas tank from beneath the passenger seats to under the bed. Now we have a hole there. They make a gasket for the fuel lines, but need a plug instead.

I am changing my valve cover gasket (OEM Gasket), but the darn thing will not stay in place, every time I try to put the cover back on the gasket falls out, it is too loose. I am putting the long edge into the top of the valve cover so the flatter section would rest against the matting surface...

Going to tackle my last (fingers crossed) exhaust leak on my 82 FJ 40 - Saudi Spec…any top tips for replacing these gaskets on the downpipe? I’ve read a thread about failures around the flange so I’ll have a look for any cracks. Any other tips are very welcome! Cheers

Does anyone happen to have a new or used in good condition 2F oil pan? I'm looking for part# 12101-61013, which uses the gasket 12151-61011. I know they're still available from a dealer, but just thought I'd check to see if anyone has a good one sitting around unused. Thank you, Mike

I am replacing my valve cover gasket and while wiggling out the Half Moon pieces both of them broke on the outside edge (my luck)......I need to order 2 replacements, can someone help me with a part# or the actual name of the pieces so I can locate them. Searching via "half moon" seems to get me...