I have been lurking the forums for a while, we bought the LC about 1.5yrs ago with 170K on the clock. Fell in love with it more than I ever thought, same will all members of the family, the quiet and comfortable ride is hard to beat. Vehicle is basically bone stock, just high miles. Vehicle has...
Started with a cyl 6 misfire. Then started smoking when cold but stopping after gets to operating temp. Got a borescope in and found this first is cylinder 4, then 5, then 6. Looks to be coolant sitting in 6 😅
Hey guys,
Quick question about head gaskets specifically for 1hdt. Is it possible for a gasket to weep oil/coolant or both without affecting the fire ring or having any other issues? I’ve been getting a bit of oil residue and now dried coolant right at the back at number 6 but no issues with...
I have a FJ40 with a '85 FJ60 2F Engine Swap.
Oil pan is leaking under the "bash plate" - probably from one of the welds.
Any recommendations on parts vendors with good prices and reasonable shipping?
I found this - seems fairly recent. Can anyone confirm the part number for the pan and...
I need a glass shop who can replace and seal the gasket on an 80 series correctly. The most recent opinion I have, which I don't trust given the source, is that the sealant that is specified in the FSM is no longer available and no replacement is available, therefore the repair cannot be...
I have a chrome less windshield gasket from City Racer. Ill sell for 70$ plus you pay shipping. It does not have the cut out for the chrome inserts bc I was reading how much of a pain in the A55 it is to save the chrome so I opted for the chrome less gasket.
My father repairs tractors and says he always uses it, but ive never seen anyone else do this. Permatex® Copper Spray-A-Gasket® High-Temp Sealant, 12 OZ – Permatex - https://www.permatex.com/products/gasketing/gasket-sealants/permatex-copper-spray-a-gasket-high-temp-sealant-12-oz/ I think its...
Just finished the timing belt on my newly purchased 07 470. Everything went fine and I’ve driven for about 150 miles but I don’t drive very long trips, 10-15 minutes each trip never in traffic. First long drive I took it out, and while sitting in bumper-to-bumper traffic I noticed my AC quit...
I have heard that others are using a bike tube as the gasket for a FJ40 front vent window gasket. We tried this, but the bike innertube as too thin. For those who have done this in the past, are you doubling the innertube to get the correct thickness or ?
I have done a search on IH8Mud but...
Toyota Genuine New OEM gaskets:
- (8) Oil drain plug:
- 90430-18008
-(10) Transmission case plug gasket : 90430-12031
- (10) Differential plug gasket:
- 12157-10010
Sold vehicle, hope somebody can use these.
Paid: $11+12+8=$31
$15 for all shipped via USPS
Hi folks,
In my Toyota gasket kit 04111-17020 I have a ~78 mm aluminum crush gasket that has a mint green coating on either side. Its been a year since my 1HDT teardown and I don't recall encountering this part. Anybody know what it is for?
Cheers
For those curios about how and possibly what to use to seal their windshield, I just had to seal mine before the rains start falling here in the NW. I got my windshield replaced a few years ago and the installer claimed you "don't need sealer if you install it correctly." Well, apparently he...
I recently replaced my transmission filter on my '94 and used the rubber gasket that came with the filter. Unfortunately, the gasket failed and leaked transmission fluid everywhere.
I am not sure if this is a common problem with rubber gaskets, but I decided to swap it out with a cork unit...
Hey, I believe my rig is leaking a bit of oil where the distributor goes into the block. It's just metal on metal. Is there no gasket for this part?
Thanks