cooling

Has anyone cut off the airflow to the center cooling console? Will it affect the main A/C components for the dash to work properly? For example, will it affect the compressor? My compressor is dead and before I buy a new one I want to make sure it's ok that the cooling console has been...

Selling a pair of hood louvers from a Lumina Z34. They were powder coated flat black from previous owner. I was going to use them on my 80, but am doing something different. So don’t need them. $100 bucks plus shipping. Can do local pickup in Corona CA(USA) as well. They come with the...

I need suggestions for better transmission cooling. - 96 1KZ-TE with A343F AT. - B&M 13,000 BTU trans cooler connected after the rad (i.e. trans outlet - rad - cooler - trans inlet). It's installed in front of the rad. - 7" fan on the trans cooler blowing air at it - Synthetic ATF I find that I...

Hi everyone, I have a HZJ 105 4.2 diesel African spec landcruiser with after market turbo. The car is quite heavy as it has TJM bumpers, Warn Winch, Safety devices roll cage and Expedition roof rack. I am looking to fit an intercooler for a bit more power and added reliability and also better...

I have to replace my leaking copper/bronze radiator and already bought an OEM type aluminum core with plastic tanks. It is a 1998 105 model 1FZFE. Since I live overseas and labor is cheap, I have a guy who can take off the plastic tanks and replace them with aluminum, including changing all of...

From 03 on wards the radiator in the 100 series was improved by reducing the fin pitch. Can I put an 03 or later radiator in my 01 LX470? Do they fit the same? Toyota Part Numbers 01, 02 part number is 1640050360 03, 04, 07 part number is 1640050290 Desno Part Numbers (from Rock Auto): 01...

I need a new radiator in my 97. I checked yesterday and the FZJ80 radiators from my dealership are $500 without discounts. The 92-94 radiators are NLA. edit: @beno confirmed the are still available. There are a lot online ranging in price from $100 up to $1,000+. I just wonder what's out...

Anyone delete this on their FJ62? Mine has only come on a few times during my ownership and I'm just wondering if it's worthwhile keeping, as removing would free up some room under the hood. I'm in the process of replacing fenders, so it'd be one less thing to put back. :D

Hey guys first post and new to the cruisers and Toyota in general. I recently picked up a 93 fjz80 and spent a few weeks getting it road worthy (totaled in low speed offset headon) so lots of body damage and damaged radiator. I searched and searched but no luck. First question: I picked up a...

I looking for this bracket and sensor. I threw mine away a few years ago and want another.

'82 carb cooling fan that works. $75 OBO

Just finishing up my Heater Core replacement on my 1995 80. As I am buttoning things up I realized there is an empty relay spot on top of the Cooing Unit, I only have one relay plugged in. I looked at Alia 176's cooling unit thread on his cooling unit R&R on his 1997 and he has two relays in...

Looking for some suggestions here as I'm at the end of my rope and flat out fed up with Griffin Thermal Products I've had (3) of these units fail in the past two years. The unit I have is as seen below Griffin Performance Fit Radiator Combos CU-00009-LS Summit warrantied the last one 2 months...

I'm almost ready to start my 350 with automatic transmission with air conditioner in my 1971 FJ40 Do I need to do anything to make sure it runs cool

Good Morning every one While preparing the 1Fblock to sand and paint I decided to remove the coolant plug and while inspection, it looks like the tip of the threaded end broke off and I don't know what to do and it looks like is pluged with rust. My question is if I drilled it out and tap it...

So we got our '67 up and running (just an engine on a frame at this point). All good except for the cooling system. After warming up and the thermostat opening, coolant started pouring out the overflow outlet. My first thought were the little bits of solder that I found in the new aftermarket...

So I installed an aluminum radiator in my '78 FJ40. I seem to be chasing a leak through the cooling system. I have been replacing hoses along the way and have replaced the radiator cap. I have burped the cooling system to make sure all air removed. It feels like I am getting to much pressure in...

my 1988 2.8L diesel hilux has these symptoms: losing some coolant with no visible leak, it is overheating quickly (10 minute drive) and the radiator cap fizzes a bit when it is opened after the engine cools. Could be head gasket but there is no exhaust bubbles in reservoir, there is no steam or...

For Sale... all aluminum 3-Row Radiator for 4WD Toyota Pickup/4Runner 84-95, may fit other models, BUT WILL NOT FIT 2WD Pickup.... Short story, bought it hoping to fit it in my 2wd Pickup, but it is too tall since the 2wd has suspension clearance issues in the front....This radiator is actually...

Here is a design for a DIY fabricated "Engine Under Shield" or lower radiator air dam for radiator air flow control. The purpose is to block heated radiator cooling air from recirculating back around into the radiator at low speed, and probably to create more of an engine compartment vacuum at...