clutch

Looking for a complete clutch pedal assembly for an 80 series, let me know what you’ve got!

Ok, we need to either rebuild the Clutch Master & Slave Cylinder or buy a new one - any recommendations? - I don't know if they make a rebuild kit for the slave cylinder. - Is it better to buy new, if so, where do you recommend. It is funny, I was on CR and the Clutch MC for a '75-80 is $45...

I'm gonna be home to put a new clutch in the my landcruiser. Found the attached Clutch instructions that may apply and searched the FAQ? What is the step machining required? AISIN specs out +0.5MM step. Do I need to have the machine shop Resurface clutch contact area, and bring down the outer...

Hi all, I recently had what I thought was a blown out master clutch cylinder. I ordered a new Aisin CMT012 from Rock Auto and installed it. I tightened it down and went to bleed it and noticed it was leaking terribly from the fitting. I took it back off and compared to the old MC and noticed...

1978 FJ40. Options are: Bend up a custom hard line. Source and replace with soft line. Source and replace with hard line. Are stock hard lines still available? Does anyone make a hard line replacement? Are the soft line replacements I've seen a good or bad idea? Thanks all, Mark

May be a silly ? but I am curious what others think. I have an gm clutch and had pullled the inpsection cover to clean it and other than visual inspection of clutch operation it can go back on. The clutch seems a bit softer on engagement but there is no dust/debris and I depressed clutch with...

Hello everyone, I have had my 74 FJ for a few months now. Since I purchased it I have been dealing with a very stiff clutch pedal. It was barely driven for a year or two before I purchased it so I hoped it would loosen up after driving it a while. That hasnt happened so Im wondering if there...

I was doing some searching found a few fan clutches out of 93-94 vehicles, but wanted to see if anyone had the “black hub” model number or part number to reference? There is a parts truck here locally wanted to make sure it was the right one n reference photos. Or if any has the aussy model...

So after clearing up all the codes, I’m in upgrade mode, looking to swap the fan clutch, I get great AC up to like 95 degree OAT, it was 91 on my way home this morning from work n even in the Costco line for fuel stayed really cold, it’s really like 95 n above, it’s been 105 lately, so at lights...

Hello All, My adventure with new to me 2001 Lexus LX470 started by winning at auction. I did pull a carfax and the service records are sparse so I'm optimistically assuming prior owners did their own maintenance (maybe wishful thinking). My latest hurdle is the ac. I noticed the high side ac...

Hello, I need to do a clutch for the cruiser I just purchased purchased below. Do you know which Clutch kit I should look into that might be in stock? Only place I've found avaliable is Ebay, and not very confident with that. Frame-HZJ73-0001986 Engine-1HZ Model-80HZ073V-MES

Hey on my 13 LC with 136k the AC just stopped working. Noticing the clutch on the AC compressor isn’t engaging or trying for that matter. I’m starting simple and wondering if the relay is bad. Which one would that be or any other fuse involved that I should take a gander at? O also just had the...

I drive an 87 JDM HJ61 with the 12HT/H55F, and unfortunately my transmission just up and died out of nowhere, so I'm replacing it with a new unit, and obviously will drop a new clutch in as well while I'm in there. My question is, would the standard or heavy duty clutch be a better choice...

Recently inherited a 78 FJ40 that my father in law rebuilt many years ago. Having no experience outside of oil changes I’ve been learning on the job over the last couple weeks and have sorta become obsessed. Finally got it running and some working brakes (master cylinder and a brake line)...

Site Search didn't show much about clutches as I expect 95% of US vehicles are automatic, but I'll ask anyway...... Looks like I'm up for a new clutch soon. Online searches indicate the very late FZJ80 from Aug 1996-on (AU spec) has a different clutch to the earlier models? What changed...

Appears my Master and Slave cylinders have finally succumbed to age and use. Replacing the Master with original parts does not seem to be an option any longer. Has anyone been successful with swapping for parts from other years or models....or know of a good rebuild kit?

Pick up in Glendale, ca. Block needs rebuild. Worn bearings. with oil pan, pump, timing, etc. $70. Just need it out. bellhousing $99, Flywheel $50, clutch and pressure plate in good shape with 3k miles $90(SOLD). and have rear main seal, $40. Email me. Thegreatdakotan@gmail.com. Mark

So I am rebuilding my 62 drivetrain (h55f and rebuild t-case) and just bout to order a new clutch and just wanted some feedback. the 62 is more of a daily driver with random excursions then the bi-monthly weekend wheeling trip, at best. I know the Aisin clutch is solid component but I am just...

Have a 78FJ40. Year ago put in brand new rebuilt 2F and mated a FJ60 new 5spd trans - completed by my local shop. Engine has been vibrating and pinging and rattling since. Mechanics now seem stumped but think the clutch burnt out due to me shifting 2-3K miles on the new trans. They want to...

Has anyone had any problems with leaking clutch fluid? My FJ40 has been sitting in the garage for a while. I was going to start it up and go for a drive but the clutch pedal went to the floor. The fluid is low in the reservoir and there is a puddle on the floor.