clutch

All parts are brand new. Prices are what I paid from Beno. Sold the 40, so I don't need these. Clutch Slave Cylinder for a 2F/4Speed. 31470-60071 $72 + shipping Oil Pan Gasket for a 2F. 12151-61010 $25 + shipping OEM Rear Main Seal for a 2F. 90311-99065 $55 + shipping Shipping...

Hey fellas, I'll first give the rundown on the specs and then I'll explain the problem... Specs: 1972 Toyota Land Cruiser FJ40 Chevy 350 (Crate motor from ~1999) NV4500 (Early version with granny low) Unknown Clutch (probably installed 58K miles ago when drivetrain was updated) Clutch Master /...

Removed transmission lower cover plate to replace starter and found this resting on the inside bottom. Where could it have come from? Made of steel about an 1 1/4" long. Thanks!

All parts are used. FJ40 aftermarket bumper $35 +shipping FJ40 OEM clutch slave and hose $25 + shipping

My '85 has a squeek in the clutch linkage and I suspect it might be the throw out bearing. I thought I read something about greasing the bearing (carefully of course) to lessen the squeek. Does this work or is the only solution to replace the bearing?

So, first of all: this is a x-post from /r/LandCruisers. I hope this is allowed. As the title says, my LJ70 has a really weird problem with the clutch. It is as if the clutch is inactive in some way. When I push down the clutch pedal, it moves very freely with no resistance at all, until an...

Started feeling a slight vibration when changing gears. After about 10-20 minutes I was driving in 5th and things seemed to go haywire (clutch slip I think?) and an extremely loud knock started causing me to pull over and turn off engine. Knock is in time with RPMs Initial look under hood...

1993 runner, 3.0L with a manual (R150f). Well, the last week or so I have had to put the clutch pedal ALL the way to the floor to disengage. Then yesterday, while driving, my pedal stopped returning and I could barely disengage the clutch. I Milked it home and discovered I was slightly low on...

Hi all, Im taking my pop-top HZJ78 on a pan-americas trip at the moment, got a bit of an issue i was hoping your expertise could help me with! When driving, for a while now, I get what feels like the clutch slipping, intermittently, especially towrds the end of longer drives. I thought this...

Hi folks, I have a worn out clutch fork. As you can see there is quite a bit of wear on the fork ends. The socket is worn out. These things are hard to find. I am considering taking it to a machine shop for repair. This solution would be pretty expensive. Has anyone here been down this path...

Hey all, I'm new to the forum as I've just purchased my first land cruiser. Bought a 1991 80 series with just around 75,000 miles. As it's a used car I'm on heightened alert about ever creak and rattle I come across, but I'm pretty sure this one might be indicative of something worse to come...

Selling all parts required for replacing your worn out clutch on a 3rd gen 4runner or similar Tacoma with the 3.4 liter V6. You are responsible for checking all part numbers for your specific application but this was purchased for a 1999 4Runner from CruiserDan so I expect it to be correct...

Build and Upgrades Links: Gear Reduction Starter for FJ40, FJ60 (NEW) First Impressions and Install My Power Steering Install Power steering install issues My Overhead Console Build Roof and windshield weather seals replacement Roof and windshield seals reference threads Remove Gear...