1fz-fe

  1. lexustruck

    Pulling engine - condenser question

    How’s it going MUD, long time reader - first time poster here. First off I need to thank everyone on this forum, I definitely wouldn’t have made it this far on my engine rebuild without this place and the people that have populated it with their knowledge and experiences. Now for the nitty...
  2. Heckraiser

    SOLD  Colorado - 1996 LX450 - 199k Miles

    1996 Lexus LX 450. 199k miles. Does not have the differential lockers (center diff/TC lock only). Asking $11,800. Local only, or you can arrange for shipping. Selling to fund rebuild/V8 swap in the clunker. The good: • Straight. Not a speck of rust anywhere on the body and very little...
  3. JMM

    1FZFE 5.2L Turbo Build

    This is what happens when you allow scope creep on an engine oil leak in your 80... Finally nearing completion on the subject build after a really looooong wait. Turns out there's a good reason we don't see many of these outside Dubai's sand drags; a lot of experimentation and custom machining...
  4. Jlvaldez

    1Fz to 1HDFT swap

    Hellos guys, fairly new to this. I have a1995 Fzj80 M/T. I’m looking into a 1HD-FT or FTE swap. I haven’t been able to find a thread about this, maybe I’m not using the forum right. Can any one point me out in the right direction please? If there is not a thread about this particular topic...
  5. O

    Beware of AAA Engine rebuilding 1FZ-FE

    So as stated I bought a new rebuilt 1FZ-FE from AAAEngine out of Southern California and if you want a summary of this post here it is: avoid AAA Engine at all costs. It has been an unmitigated train wreck. First I ordered the motor. Took a couple months to be shipped. Frustrating but I...
  6. cruisin97

    Lots of smoke on first start of new/rebuilt engine

    Hey all. I just finished building up a 1FZ-FE starting with a new short block, and a rebuilt head. I filled it with fluids last night and checked this morning. No signs of leaks or anything. This morning I pulled the coil wire, let it crank a few times to build oil pressure, and then plugged in...
  7. FZJ8xero

    For Sale  Orange County CA 80 Series 1FZ-FE Air Cleaner Filter Box (Part Number 6601)

    Hi folks, Up for sale is 1FZ-FE AIR CLEANER FILTER BOX ASSEMBLY OEM - $100 (or best offer) Part number of assembly as shown in the photo is 6601. Local pickup preferred. But willing to ship. Estimated shipping is +$70 ground. Thanks for looking!
  8. masperk

    Installing Cylinder Head with Intake Assembly Attached per FSM?

    Hello! I am in the middle of a head gasket job. I wanted to see who has installed their head with the upper and lower intake bolted to the head per the FSM. I haven't seen any examples of people reinstalling per the FSM. It seems others only bolt the lower intake up prior to installing the...
  9. O

    For Sale  California: Manual Transmission Conversion ECU

    1FZ-FE manual transmission ECU for sale. Bought it for a project that never happened. 80 series Land Cruiser manual transmission ECU. Used (of course) but was assured of functioning condition. This allows you to do a manual transmission conversion without all the dash lights being lit up...
  10. Novaphotog

    Blackstone results

    1996 1FZ-FE 254,000 miles Any particular reason these metals would be higher or just 255,000 mile things? Haven't noticed any issues in operation, with this info, Blackstone staff said it was not a concern and to check back with another test and we can build a trend.
  11. OlyWaFJ

    Wanted  1FZ-FE Engine Wanted - WA State

    My 93 is in need of a replacement engine, the recent test results were not good. I would prefer one that is already rebuilt, I have cash in in hand and own a truck with a 2 ton lift gate. Located in Olympia, WA willing to travel the PNW for pickup.
  12. LALOTAI AUTO

    For Sale  Grand Prairie Texas 1FZ-FE for sale

    I am selling a 1fzfe engine whit out accessories the deal is with transmission and transfer case 170k Milles the engine run with out problems or noise. I have the the frame too with out rust or bend Prices don't include shipping, buyer pays shipping.
  13. E

    Missing MAF ?

    Dear all, This is my first post. I live in Qatar and I just bought my first Toyota, a gorgeous 2001 LC, 50th anniversary, with 540k km on the clock. The car runs pretty well despite the high mileage. In fact, it was the best LC I tested and inspected when I was looking around. Most of the LCs...
  14. offroadvegan

    SOLD  Professionally Rebuilt 1FZ-FE and A442F Transmission

    Hello I am selling my 1993 1FZ-FE that was rebuilt by Pacific Japanese Engines in Oregon about 20k miles ago. It was bored out .2-.3 over, and all OEM components were used in the rebuild. Head was machined, larger pistons, new timing, etc. Also was all rebaselined with new plugs/belts/water...
  15. eikelben

    PAIR Reed Valve - rattle on startup

    I was shocked to find not a single posting about this noise – I was hoping to learn that it's a "land cruiser" sound and nothing to be worried about. I have read about people eliminating the system entirely – we do have emissions where I live so not likely a path I want to go down unless it...
  16. B

    Minor Oil Leak

    Just acquired a 1993 80 Series (1FZ-FE) and I have located a small oil leak. The bloke I bought it from said it was from the power steering, but that doesn't seem to be the cause to me? Doesn't look like the main seal, could it be the orange o-ring on the pressure relief valve? Photo is from...
  17. S

    1Fz-fe new starter motor grinding noise at the end of a start

    Hi everyone, I got a 1998 1fz-fe 105 series with automatic transmission. I took it to the mechanic to get the alternator and the starter motor changed over the weekend. After I got my car back I immediately noticed that there was a grinding noise when I start the car. The grinding noise only...
  18. FZJ8xero

    For Sale  SoCal 80 Series 1FZ-FE Air Cleaner Filter Box

    Hi folks, Up for sale is 1FZ-FE AIR CLEANER FILTER BOX ASSEMBLY OEM - $100 Local pickup preferred. But willing to ship. Estimated shipping is +$70 ground. Thanks for looking!
  19. Panick619

    93 1FZ-FE EGR Valve w/no Temp Sensor

    My 93 FZJ80 is throwing the Code 71. After cleaning the modulator and replacing all the lines, I ordered a new EGR valve. My issue is that my new EGR valve did not come with the temp sensor hole, assuming it's from a 95-97. Can I still use this valve and have a functioning EGR system? And/or...
  20. Stutes

    Builds  FJ-43 Build

    UPDATE OCT 29th, 2020 It has been three months and 2500 miles (updated on Oct 29, 2020) since I received my FJ43 from Terra Cruisers (FJ-43 Build) and I have been spending a lot of time going through, learning and checking everything during my quarantine downtime. I created another thread...
Back
Top Bottom