1fz-fe

  1. masperk

    Installing Cylinder Head with Intake Assembly Attached per FSM?

    Hello! I am in the middle of a head gasket job. I wanted to see who has installed their head with the upper and lower intake bolted to the head per the FSM. I haven't seen any examples of people reinstalling per the FSM. It seems others only bolt the lower intake up prior to installing the...
  2. O

    For Sale  California: Manual Transmission Conversion ECU

    1FZ-FE manual transmission ECU for sale. Bought it for a project that never happened. 80 series Land Cruiser manual transmission ECU. Used (of course) but was assured of functioning condition. This allows you to do a manual transmission conversion without all the dash lights being lit up...
  3. Novaphotog

    Blackstone results

    1996 1FZ-FE 254,000 miles Any particular reason these metals would be higher or just 255,000 mile things? Haven't noticed any issues in operation, with this info, Blackstone staff said it was not a concern and to check back with another test and we can build a trend.
  4. OlyWaFJ

    Wanted  1FZ-FE Engine Wanted - WA State

    My 93 is in need of a replacement engine, the recent test results were not good. I would prefer one that is already rebuilt, I have cash in in hand and own a truck with a 2 ton lift gate. Located in Olympia, WA willing to travel the PNW for pickup.
  5. LALOTAI AUTO

    For Sale  Grand Prairie Texas 1FZ-FE for sale

    I am selling a 1fzfe engine whit out accessories the deal is with transmission and transfer case 170k Milles the engine run with out problems or noise. I have the the frame too with out rust or bend Prices don't include shipping, buyer pays shipping.
  6. E

    Missing MAF ?

    Dear all, This is my first post. I live in Qatar and I just bought my first Toyota, a gorgeous 2001 LC, 50th anniversary, with 540k km on the clock. The car runs pretty well despite the high mileage. In fact, it was the best LC I tested and inspected when I was looking around. Most of the LCs...
  7. offroadvegan

    SOLD  Professionally Rebuilt 1FZ-FE and A442F Transmission

    Hello I am selling my 1993 1FZ-FE that was rebuilt by Pacific Japanese Engines in Oregon about 20k miles ago. It was bored out .2-.3 over, and all OEM components were used in the rebuild. Head was machined, larger pistons, new timing, etc. Also was all rebaselined with new plugs/belts/water...
  8. eikelben

    PAIR Reed Valve - rattle on startup

    I was shocked to find not a single posting about this noise – I was hoping to learn that it's a "land cruiser" sound and nothing to be worried about. I have read about people eliminating the system entirely – we do have emissions where I live so not likely a path I want to go down unless it...
  9. B

    Minor Oil Leak

    Just acquired a 1993 80 Series (1FZ-FE) and I have located a small oil leak. The bloke I bought it from said it was from the power steering, but that doesn't seem to be the cause to me? Doesn't look like the main seal, could it be the orange o-ring on the pressure relief valve? Photo is from...
  10. S

    1Fz-fe new starter motor grinding noise at the end of a start

    Hi everyone, I got a 1998 1fz-fe 105 series with automatic transmission. I took it to the mechanic to get the alternator and the starter motor changed over the weekend. After I got my car back I immediately noticed that there was a grinding noise when I start the car. The grinding noise only...
  11. FZJ8xero

    For Sale  SoCal 80 Series 1FZ-FE Air Cleaner Filter Box

    Hi folks, Up for sale is 1FZ-FE AIR CLEANER FILTER BOX ASSEMBLY OEM - $100 Local pickup preferred. But willing to ship. Estimated shipping is +$70 ground. Thanks for looking!
  12. Panick619

    93 1FZ-FE EGR Valve w/no Temp Sensor

    My 93 FZJ80 is throwing the Code 71. After cleaning the modulator and replacing all the lines, I ordered a new EGR valve. My issue is that my new EGR valve did not come with the temp sensor hole, assuming it's from a 95-97. Can I still use this valve and have a functioning EGR system? And/or...
  13. Stutes

    Build  FJ-43 Build

    UPDATE OCT 29th, 2020 It has been three months and 2500 miles (updated on Oct 29, 2020) since I received my FJ43 from Terra Cruisers (FJ-43 Build) and I have been spending a lot of time going through, learning and checking everything during my quarantine downtime. I created another thread...
  14. My FZJ100

    My FZJ100

    With high performance N/A engine.
  15. anothernord

    SOLD  CO: Good running 1FZ-FE w 212k - $250

    I pulled this out to make way for the diesel swap I'm working on. It ran great when pulled, but has noisy power steering pump. It had great power and sounded great other than the whining power steering pump. Wiring harness and throttle body are not included, local pickup only. $250...
  16. Unrealbarracuda

    For Sale  1997 LX450 80 Series Land Cruiser

    This particular 80 series land Cruiser is well maintained and had the same owner for 19 years. It still retains the new car smell, the wood trim is untampered, and the leather seats are plush. Unfortunately there’s no lockers however shifting to 4 low is no issue and smooth. Slight under...
  17. Chachi254

    1996 1FZ-FE with 200k started billowing thick white smoke when accelerating from stoplight

    So, a couple days ago I cleaned my TB and intake with TB cleaner and Seafoam. Everything has been fine but today, after driving all day without issue, I accelerated from a stoplight and white smoke began billowing out of my exhaust for a good 50yds. It was thick white smoke and it hung around...
  18. Chachi254

    Upstream o2 Sensor Issues - Intermittent P0135 error still present after replacing sensor

    Hey Mudders, I've searched quite a bit for similar posts to my issue, but I cant seem to find anything that helps explain what I'm experiencing. I'm hoping someone can point me in the right direction or has had a similar issue they were able to fix. The P0135 error is intermittent and can...
  19. Wompom

    1FZ-FE Break In Procedures/Tips/Advice

    Yes - I searched. There are about two threads that I could find that really cover this. I'm hoping to pick some peoples brains who have broken in their motors with a similar rebuild on them. Planning on getting my fresh 1fz in the truck this weekend. It has a rebuilt head (same cams -...
  20. SledDogRacing

    Parting Out  Feeler -- 1996 Land Cruiser - 1FZ-FE motor + transmission + parts for sale

    I just pull my engine. Putting in a lq9. I am looking to sell the engine and transmission. I really prefer to sell it as a whole engine/transmission or at least as major pieces. I don’t really know prices but a lot of what I put in is new oem genuine Toyota parts. Please pm me and we can talk...
Back
Top Bottom