- Location
- United States
Please see this thread for more pics. https://forum.ih8mud.com/showthread.php?t=152180
Wanna get rid of the big stuff first. All available for pick up in Lansing MI. 2 hrs from Detroit. Small Stuff I can ship on your dime. Prices do not include shipping. Figure it out from 48823.
2F Engine, 4 speed trans, and transfer. Engine runs good. Runs rich due to Weber carb. Stock exhaust manifold. Mini Truck powersteering DOES come with it. I can cut the mount off of the frame. I Dont know the compression #s. I would highly recommend you coming and starting it, reving it testing it before its pulled out. Bring a cherry picker and I will help you pull it so you know exactly what your getting. I dont see any leeks on the floor from where this was sitting. Take the exhaust too if you want it. Just a muffler basically.
$500.00 for the engine, trans and transfer. from Fan to Ebrake, from Carb to Pan. All complete. Need it gone. No shift knobs for the trans or transfer though. aftermarket kit for the dizzy and a large accel coil.
Axles. Fine spline disk front, Warn Lockouts. Set up for Spring over or Under, both sets of perches are still there. Welded rear diff, I would assume the front is welded too. I have two turned drums and 4 new, 0 mile shoes for the rear. Brakes work right now, I would at least go over the brakes and probably do a front end rebuilt. Knuckles are a bit weepy. The rear has a track bar that is included.
$400.00 for both axles. no tires or rims with them. You can have the lug nuts. Lock out to lock out, Drum to drum. I might be able to help with delivery of these to the Ohio Boarder for gas money.
New 2.5 inch BDS Spring lift. Great shape, have poly bushings. 4 springs, no shocks unless you want the ones on there now, but the perches are set up different. Shocks are probably no good for your application, and wont work with stock set up. Will throw in the ubolts if you want them.
$300.00 for all 4 springs. This kit was $825.00 from BDS before discontinued I can probably ship this but am not sure.
Full roll cage. pro built unkn who though. Front hoop with 4 spreaders to the back hoop. Welded to the floor with angle. not bolted. Very sturdy. Look at the photos. if you want the front pre runner bumper and everything else take it.
$200.00 bucks for it all. You will need to pick it up, I can cut it out and have it ready. (once the top is off)
I will get photos of specific stuff you want.
This was basically a complete FJ 40 with a bad frame.
Bear with me. I have two kids, a job, dog, and a cast on one leg. so It may take a while to pull stuff off. Obviously if your standing in my garage it will go quicker
Prices are pretty firm and damn low IMHO.
I can get to the smaller stuff before the bigger stuff and get it shipped out. Post up here or PM me and we can get to specifics.
There is a Michigan Assembled title. (basically for dune buggies and kit cars) this is not a clean title but not a scrap or salvage title either. I need the title to take the carcass to the crusher.
Wanna get rid of the big stuff first. All available for pick up in Lansing MI. 2 hrs from Detroit. Small Stuff I can ship on your dime. Prices do not include shipping. Figure it out from 48823.
2F Engine, 4 speed trans, and transfer. Engine runs good. Runs rich due to Weber carb. Stock exhaust manifold. Mini Truck powersteering DOES come with it. I can cut the mount off of the frame. I Dont know the compression #s. I would highly recommend you coming and starting it, reving it testing it before its pulled out. Bring a cherry picker and I will help you pull it so you know exactly what your getting. I dont see any leeks on the floor from where this was sitting. Take the exhaust too if you want it. Just a muffler basically.
$500.00 for the engine, trans and transfer. from Fan to Ebrake, from Carb to Pan. All complete. Need it gone. No shift knobs for the trans or transfer though. aftermarket kit for the dizzy and a large accel coil.
Axles. Fine spline disk front, Warn Lockouts. Set up for Spring over or Under, both sets of perches are still there. Welded rear diff, I would assume the front is welded too. I have two turned drums and 4 new, 0 mile shoes for the rear. Brakes work right now, I would at least go over the brakes and probably do a front end rebuilt. Knuckles are a bit weepy. The rear has a track bar that is included.
$400.00 for both axles. no tires or rims with them. You can have the lug nuts. Lock out to lock out, Drum to drum. I might be able to help with delivery of these to the Ohio Boarder for gas money.
New 2.5 inch BDS Spring lift. Great shape, have poly bushings. 4 springs, no shocks unless you want the ones on there now, but the perches are set up different. Shocks are probably no good for your application, and wont work with stock set up. Will throw in the ubolts if you want them.
$300.00 for all 4 springs. This kit was $825.00 from BDS before discontinued I can probably ship this but am not sure.
Full roll cage. pro built unkn who though. Front hoop with 4 spreaders to the back hoop. Welded to the floor with angle. not bolted. Very sturdy. Look at the photos. if you want the front pre runner bumper and everything else take it.
$200.00 bucks for it all. You will need to pick it up, I can cut it out and have it ready. (once the top is off)
I will get photos of specific stuff you want.
This was basically a complete FJ 40 with a bad frame.
Bear with me. I have two kids, a job, dog, and a cast on one leg. so It may take a while to pull stuff off. Obviously if your standing in my garage it will go quicker
Prices are pretty firm and damn low IMHO.
I can get to the smaller stuff before the bigger stuff and get it shipped out. Post up here or PM me and we can get to specifics.
There is a Michigan Assembled title. (basically for dune buggies and kit cars) this is not a clean title but not a scrap or salvage title either. I need the title to take the carcass to the crusher.
Last edited:
