Search results for query: *

Forum search Google search

  1. jagota

    FJ40 Mark/Downey Header

    On the later models the exhaust went under the frame rail before the skid plate, along the outside of the frame rail, and then back under the frame rail after the skid plate. It continues over the rear axle and the across the back, where the muffler is located, to exit on the right side.
  2. jagota

    FJ40 Mark/Downey Header

    I need to be on this list also.
  3. jagota

    FJ40 Fiberglass Front end pics

    LOL! So true.
  4. jagota

    FJ40 Fiberglass Front end pics

    To tilt back you would use the standard hood hinges at the cowl. Latch it at the front. Makes a really tall wind catcher when raised.
  5. jagota

    FJ40 Fiberglass Front end pics

    Nice! I have all that fuel injection stuff, but would have to alter it a bit to make it work,so it won't be going on there.It still runs, dispite all the times it should have blown up.
  6. jagota

    Water leaking in behind dash

    There should not be any drain tubes on a '79. The cowl vent went away from '79 on.
  7. jagota

    Transfer Case/PTO Question

    Looks like an overdrive to me.Definitely not a PTO.
  8. jagota

    Gear box slip?

    Sounds like the clutch is slipping.Is it properly adjusted? When you say sputtering, if that means that the engine is revving and you are losing drive to the wheels, then it is the clutch. If by slowing down means less throttle in the same gear and it has drive, it is the clutch.
  9. jagota

    Color Trim LE11 - does it exist???

    Thank you wscbill.
  10. jagota

    Engine swap question....v12?

    Well I never would have believed there was another one. Looks like the engine is farther back than mine. Gotta love it!
  11. jagota

    Engine swap question....v12?

    PM replied.
  12. jagota

    Can you get a smog check?

    You can take it to any smog place and do a pre-check. That should tell you what you want to know.
  13. jagota

    Toyota TEQ repro mudflaps on an FJ40

    I would be in for a set .
  14. jagota

    Dana60 rear in a '73 FJ40

    Ding,ding,ding.
  15. jagota

    Hardtop bolts are snapping off..

    How does one bend a drill bit like that?
  16. jagota

    Hardtop bolts are snapping off..

    Those will not come out in that condition. Those threads need a major clean up b-4 even attempting. If you have a die that will fit in there, run it down as far as possible, then work them out slowly, running them back in every 1/4 to 1/2 turn to clear the crud. If the heads are popping off you...
  17. jagota

    Home Built Knuckle Centering Tool

    Not sure about Monrovia, but there are a few in Duarte.
  18. jagota

    Split case PTO value

    Agreed.
Back
Top Bottom