Search results for query: *

Forum search Google search

  1. Adrigan

    Front Drive Shaft is too loose

    Thanks, I measured them. The longer end is towards the front. Also the bumpstops line up with the axel.
  2. Adrigan

    Front Drive Shaft is too loose

    YEah, I think so too. Let me measure them. Long side facing front?
  3. Adrigan

    Front Drive Shaft is too loose

    The Yolk and Driveshaft splines. Splines are farther out.
  4. Adrigan

    Front Drive Shaft is too loose

    Question for the group. My FJ40 is lifted 2.5 inches via leaf springs via a Pro-Comp kit. Now my issue is that my front driveshaft is loose. I can wiggle it back and forth by hand and feels like just the tip is in :) Unfortunately, I can't remember if it was this way before I did the lift, as I...
  5. Adrigan

    Still no brakes!

    I just have to post a thank you to these threads. I spent about a month trying to figure out my brakes. Bleed a gallon of fluid. Burped the cylinders, new master, new booster. Finally took of hubs and found that one of my adjusters were stuck which I had to free. Once that got working I was...
  6. Adrigan

    Choke pull off diaphragm

    I traced the source of my rough idle to my choke pull off 21609 pictured below. Anybody know where to get a replacement. I can't find it anywhere.
  7. Adrigan

    Tearing into my Aisan Carb

    Anybody know where to purchase the choke pull off 21609 i the pic above? I isolated it as the source of my rough idle (it doens't hold vacuum) and I can't find a replacement
  8. Adrigan

    Intermittent rough idle when hot?

    Would like to know also, truck is desmogged. new pump, checked booster and PCV for leaks....still problem
  9. Adrigan

    Knuckle rebuild?

    For reference. If it helps, I redid front end the first time in about a week. This was because thehub bolts were stuck and I had to get tools/make tools ETC. I had to rebuild one hub because I thought a peice of metal might be stuck in there. That only took me about 4 hours. Also don't mix...
  10. Adrigan

    body mount question

    I just noticed that this isn't too old of a post. I'm considering replacing my bushings as everytime I go over a speed bump my rear end sounds lilke i'm dropping metal (leafs look good, no cracks/sag) Would love to hear ride updates.
  11. Adrigan

    FJ40 Aftermarket Hardtop

    My top is the one the guy ripped (due to clearance) of in the picture it has vents in the front and speakers in the inside.
  12. Adrigan

    FJ40 Aftermarket Hardtop

    I have this top on MY 40. I've been looking for where it is from. Can't find it anywhere.
  13. Adrigan

    Getting my 69 FJ40 Painted Now Holley Sniper EFI

    Looks good from the pics at least. I'm curious about how long did it take and general ballpark? My paint is so so outside and brush swirl hell inside :)
  14. Adrigan

    What Steering Box Do I have?

    Thanks for the info Downy. I guess I will be looking into rebuilding more than my box !@*$.
  15. Adrigan

    What Steering Box Do I have?

    Thanks for the confirm on the Saginaw. Oh it's leaking. Why wouldn't I be able to get a rebuild kit for it? Assuming I can figure out which Saginaw Box I have (I think 800 series 82 model?)
  16. Adrigan

    What Steering Box Do I have?

    I thought it looked like one but decided it wasn't do to the same reason you did. I'm relatively new to this so I wanted more experienced people to set em strait. 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
  17. Adrigan

    What Steering Box Do I have?

    So I got a '76FJ40 about 3 weeks ago. Since then I've changed all the fluids, Tie rods, Parking Brake, Fixed a crap load of electrical issues. Now I'm onto rebuilding the power steering since it is all wet down there. From this wonderful forum I know there is Saginaw, minitruck, ETC. However...
  18. Adrigan

    Fj40 dash lights, bulb upgrade

    Thank you so much for the screen grab
Back
Top Bottom