@kirvesmies made up a new model :bounce: I have a HJ60, but it is the later model. I have not looked seriously on a older HJ rear seat belts. But I understand that the basics is same on early models also. I did not really understand what the question was but I try to answer anyway :D Seatbelts...
@ToyotaMatt
This is again notifications I have made here in Finland and our versions. As mentioned above by @Eurasiaoverland headlights does not identify HJ60 and HJ61. First 61 here were with round headlights and no diff locks. Then last year with round headlights had diff locks. And from...
A friend of mine fitted first gen Volvo V70 drivers seat and wider section of back seat into a HJ60. Comfortable to sit and as a bonus you get arm rest for driver and 3 seat front seats. Here HJ60 and 61 are 6 pers. cars.
It has been a long and cold winter. Couple of weeks in january constant -30deg celcius. Lots of snow also. Snow would be deeper without couple week long periods of + degrees. So no hurry to take the Snow white out of the garage.
But she seems to have everything ok inside the garage. No leaks...
This season has ended. Did drive a bit, only 461km. But after all leakage etc. problems the car has worked fine. It has been very rainy autumn so sunny driving days has not been many. But I took some photos on good days.
I am surprised of that I am not afraid to drive it. I have driven in...
They were these: Genuine LandCruiser 70 Series HZJ KZJ PZJ BJ Transfer Case Hi-Lo Sender Switch | eBay - https://www.ebay.co.uk/itm/Genuine-LandCruiser-70-Series-HZJ-KZJ-PZJ-BJ-Transfer-Case-Hi-Lo-Sender-Switch-/192480199160?_trksid=p2349526.m4383.l4275.c1
Next day couple of guys from SLCK (Finnish Land Cruiser Club) to make the museum car inspection. In Finland we have this museum car thing. If the car is over 30 years old, original and in good shape it can be registered as museum car. Taxes and insurance is very cheap. Normally this one with...
Then it was time to take it out and drive home.
Power steering was yelling like crazy and did not stop no matter what I tried. Then some fellow Cruiser head told me that his reservoir had clogged in the new zink plating process. I opened my reservoir and yes. This was the reason. It wass full...
Then the mud flaps. I bought these from ebay some years ago. Also later one rear flap where I got the missing mounting bracket from.
Front ones were in really bad shape.
Rear ones was fine.
Made some new metal pieces.
Tried to straighten out one front flap. Did not work.
Glued the...
After this I mounted the radio finally on its place. Got to peel of the protective film.
Injection pump looked so rusty and ugly that I had to sort it out before I can call the car finished. Also removed the injectors for a refurbish. Pump make up and injector overhaul was done by About Us |...
Rear door cards got new metal parts.
Stopper clip got powder coat.
Ash tray cleaned and treated. Before and after.
And finished product.
Then door cards on.
Plastic under the handle is new.
Speaker sits just at the top of fabric. Just like I wanted it.
Then door opening trims...
Radio had problems. It came on when turning key to "acc" position. It also turned of with the key but the lights for buttons stayed on. I asked around and someone suggested to change the relay to a version with a resistor to kill all the possible small currents that may cause this. It did not...
It is really slow. Usefull rpm range is from idle to a bit over 2000. Between that all the magic happens, over that nothing. But in other hand there is really no difference what gears you use when accelerating. It is tough engine but not a quick one. But it sounds nice. And if you want it to...
No. Round headlight ones has a notch in the center of bumper for winch fairlead. Square headlights does not have that notch. Also the fairlead is 15mm lower than the ones on round headlights. Also all bumpers for winch does not have the hole for towing hook as the hook mounts to frame...